Datasheet Texas Instruments DS100BR210 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DS100BR210 |
Low Power 10,3 Gbit / s 2-Kanal-Repeater mit Eingangsausgleich und Ausgangsentlastung
Datenblätter
DS100BR210 Ultra Low Power 10.3 Gbps 2-Channel Repeater with Input Equalization and Output De-Emphasis datasheet
PDF, 1.9 Mb, Revision: E, Datei veröffentlicht: Jan 29, 2015
Auszug aus dem Dokument
Preise
Status
| DS100BR210SQ/NOPB | DS100BR210SQE/NOPB | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No |
Verpackung
| DS100BR210SQ/NOPB | DS100BR210SQE/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 24 | 24 |
| Package Type | RTW | RTW |
| Industry STD Term | WQFN | WQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 1000 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | BR210 | BR210 |
| Width (mm) | 4 | 4 |
| Length (mm) | 4 | 4 |
| Thickness (mm) | .75 | .75 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | DS100BR210SQ/NOPB | DS100BR210SQE/NOPB |
|---|---|---|
| Application | Front Port, Backplane, Peripheral I/O | Front Port, Backplane, Peripheral I/O |
| Device Type | Repeater | Repeater |
| Input Compatibility | AC-Coupled,CML | AC-Coupled,CML |
| Number of Channels | 2 | 2 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Package Group | WQFN | WQFN |
| Protocols | 10G-SR/LR,10G-CR,10G-KR,SAS1,SAS2,SATA1,SATA2,SATA3,Infiniband,FibreChannel,CPRI,OBSAI,Interlaken,sRIO,General Purpose | 10G-SR/LR,10G-CR,10G-KR,SAS1,SAS2,SATA1,SATA2,SATA3,Infiniband,FibreChannel,CPRI,OBSAI,Interlaken,sRIO,General Purpose |
| Speed(Max), Gbps | 10.3 | 10.3 |
| SupplyVoltage, Volt | 3.3,2.5 | 3.3,2.5 |
Öko-Plan
| DS100BR210SQ/NOPB | DS100BR210SQE/NOPB | |
|---|---|---|
| RoHS | Compliant | Compliant |
Anwendungshinweise
- Understanding EEPROM Programming for High Speed Repeaters and Mux BuffersPDF, 317 Kb, Datei veröffentlicht: Oct 9, 2014
System designers often use EEPROM (Electrically Erasable Programmable Read-Only Memory) to program a set of customized high speed repeater and mux buffer start-up settings that are different from the default. Using the information here will make repeater EEPROM configuration and programming easy to implement and understand. This application note addresses SMBus-to-EEPROM mapping for 2-channel repe
Modellreihe
Serie: DS100BR210 (2)
Herstellerklassifikation
- Semiconductors> Interface> Signal Conditioners> Redriver/Repeater