Datasheet Texas Instruments DAC5686 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DAC5686 |
Zweikanaliger 16-Bit-, 500-MSPS-, 1x-16x-Interpolations-Digital-Analog-Wandler (DAC)
Datenblätter
16-Bit 500 MSPS 2x-16x Interpolating Dual-Channel DAC datasheet
PDF, 861 Kb, Revision: F, Datei veröffentlicht: Jun 3, 2009
Auszug aus dem Dokument
Preise
Status
| DAC5686IPZP | DAC5686IPZPG4 | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No |
Verpackung
| DAC5686IPZP | DAC5686IPZPG4 | |
|---|---|---|
| N | 1 | 2 |
| Pin | 100 | 100 |
| Package Type | PZP | PZP |
| Industry STD Term | HTQFP | HTQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 90 | 90 |
| Carrier | EIAJ TRAY (10+1) | EIAJ TRAY (10+1) |
| Device Marking | DAC5686IPZP | DAC5686IPZP |
| Width (mm) | 14 | 14 |
| Length (mm) | 14 | 14 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | DAC5686IPZP | DAC5686IPZPG4 |
|---|---|---|
| Architecture | Current Sink | Current Sink |
| DAC Channels | 2 | 2 |
| Interface | Parallel CMOS | Parallel CMOS |
| Interpolation | 1x,2x,4x,8x,16x | 1x,2x,4x,8x,16x |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Package Group | HTQFP | HTQFP |
| Package Size: mm2:W x L, PKG | 100HTQFP: 256 mm2: 16 x 16(HTQFP) | 100HTQFP: 256 mm2: 16 x 16(HTQFP) |
| Power Consumption(Typ), mW | 445 | 445 |
| Rating | Catalog | Catalog |
| Resolution, Bits | 16 | 16 |
| SFDR, dB | 72 | 72 |
| Sample / Update Rate, MSPS | 500 | 500 |
Öko-Plan
| DAC5686IPZP | DAC5686IPZPG4 | |
|---|---|---|
| RoHS | Compliant | Compliant |
Anwendungshinweise
- DAC5686/DAC5687 Clock Generation Using PLL & External Clock Modes (Rev. A)PDF, 686 Kb, Revision: A, Datei veröffentlicht: Jul 21, 2005
DAC5686/DAC5687 Application NOte Clock Generation Using PLL & External Clock Modes - Interfacing op amps to high-speed DACs, Part 1: Current-sinking DACsPDF, 319 Kb, Datei veröffentlicht: Jul 14, 2009
- Passive Terminations for Current Output DACsPDF, 244 Kb, Datei veröffentlicht: Nov 10, 2008
The correct implementation of the high-speed DAC output termination is critical to achieving the best possible performance. The typical application involves choosing the correct network to create the necessary dc bias levels and correct effective impedance load to keep the output voltage within the compliance levels. This ensures that the maximum output signal amplitude and optimum ac performance - Q3 2009 Issue Analog Applications JournalPDF, 2.1 Mb, Datei veröffentlicht: Jul 14, 2009
- High Speed Digital-to-Analog Converters Basics (Rev. A)PDF, 829 Kb, Revision: A, Datei veröffentlicht: Oct 23, 2012
- Phase Noise Performance and Jitter Cleaning Ability of CDCE72010PDF, 2.3 Mb, Datei veröffentlicht: Jun 2, 2008
This application report presents phase noise data taken on the CDCE72010 jitter cleaner and synchronizer PLL device. The phase noise performance of the CDCE72010 depends on the phase noise of the reference clock VCXO clock and the CDCE72010 itself. This application report shows the phase noise performance at several of the most popular CDMA frequencies. This data helps the user to choose the rig - CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital ConvertersPDF, 424 Kb, Datei veröffentlicht: Jun 8, 2008
Texas Instruments has recently introduced a family of devices suitable to meet the demands of high-speed high-IF sampling analog-to-digital converters (ADCs) such as the ADS5483 which is capable of sampling up to 135 MSPS. To realize the full potential of these high-performance devices the system must provide an extremely low phase noise clock source. The CDCE72010 clock synthesizer chip offers
Modellreihe
Serie: DAC5686 (2)
Herstellerklassifikation
- Semiconductors> Data Converters> Digital-to-Analog Converters (DACs)> High Speed DACs (>10MSPS)