Datasheet Texas Instruments DAC5662 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DAC5662 |
Zweikanaliger 12-Bit-Digital-Analog-Wandler (DAC) mit 275 MSPS und MS5
Datenblätter
Dual, 12-Bit, 275 MSPS Digital-to-Analog Converter (Rev. B)
PDF, 728 Kb, Revision: B, Datei veröffentlicht: May 14, 2009
Dual, 12-Bit, 275 MSPS Digital-to-Analog Converter datasheet
PDF, 725 Kb, Revision: B, Datei veröffentlicht: May 14, 2009
Auszug aus dem Dokument
Preise
Status
| DAC5662IPFB | DAC5662IPFBR | DAC5662IPFBRG4 | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No | Yes |
Verpackung
| DAC5662IPFB | DAC5662IPFBR | DAC5662IPFBRG4 | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 48 | 48 | 48 |
| Package Type | PFB | PFB | PFB |
| Industry STD Term | TQFP | TQFP | TQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G | S-PQFP-G |
| Package QTY | 250 | 1000 | 1000 |
| Carrier | JEDEC TRAY (10+1) | LARGE T&R | LARGE T&R |
| Device Marking | DAC5662I | DAC5662I | DAC5662I |
| Width (mm) | 7 | 7 | 7 |
| Length (mm) | 7 | 7 | 7 |
| Thickness (mm) | 1 | 1 | 1 |
| Pitch (mm) | .5 | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | DAC5662IPFB | DAC5662IPFBR | DAC5662IPFBRG4 |
|---|---|---|---|
| Approx. Price (US$) | 11.25 | 1ku | ||
| Architecture | Current Source | Current Source | Current Source |
| DAC Channels | 2 | 2 | |
| DAC: Channels | 2 | ||
| IMD3(dBc) | 78 | ||
| Interface | Parallel CMOS | Parallel CMOS | Parallel CMOS |
| Interpolation | 1x | 1x | |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | |
| Operating Temperature Range(C) | -40 to 85 | ||
| Package Group | TQFP | TQFP | TQFP |
| Package Size(mm2=WxL) | 48TQFP: 81 mm2: 9 x 9 | ||
| Package Size: mm2:W x L, PKG | 48TQFP: 81 mm2: 9 x 9(TQFP) | 48TQFP: 81 mm2: 9 x 9(TQFP) | |
| Power Consumption(Typ), mW | 330 | 330 | |
| Power Consumption(Typ)(mW) | 330 | ||
| Rating | Catalog | Catalog | Catalog |
| Resolution, Bits | 12 | 12 | |
| Resolution(Bits) | 12 | ||
| SFDR, dB | 81 | 81 | |
| SFDR(dB) | 81 | ||
| SNR(dB) | 73 | ||
| Sample / Update Rate, MSPS | 275 | 275 | |
| Sample / Update Rate(MSPS) | 275 | ||
| Settling Time(?s) | 0.02 |
Öko-Plan
| DAC5662IPFB | DAC5662IPFBR | DAC5662IPFBRG4 | |
|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant |
| Pb Free | Yes |
Anwendungshinweise
- Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACsPDF, 617 Kb, Datei veröffentlicht: Oct 4, 2009
- Passive Terminations for Current Output DACsPDF, 244 Kb, Datei veröffentlicht: Nov 10, 2008
The correct implementation of the high-speed DAC output termination is critical to achieving the best possible performance. The typical application involves choosing the correct network to create the necessary dc bias levels and correct effective impedance load to keep the output voltage within the compliance levels. This ensures that the maximum output signal amplitude and optimum ac performance - High Speed Digital-to-Analog Converters Basics (Rev. A)PDF, 829 Kb, Revision: A, Datei veröffentlicht: Oct 23, 2012
- Q4 2009 Issue Analog Applications JournalPDF, 1.5 Mb, Datei veröffentlicht: Oct 4, 2009
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Datei veröffentlicht: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
Modellreihe
Serie: DAC5662 (3)
Herstellerklassifikation
- Semiconductors> Data Converters> Digital-to-Analog Converters (DACs)> High Speed DACs (>10MSPS)