Datasheet Texas Instruments CDCE913QPWRQ1 — Datenblatt
Hersteller | Texas Instruments |
Serie | CDCE913-Q1 |
Artikelnummer | CDCE913QPWRQ1 |
Programmierbarer 1-PLL-VCXO-Taktsynthesizer für den Automobilkatalog mit 2,5-V- oder 3,3-V-LVCMOS-Ausgängen 14-TSSOP -40 bis 125
Datenblätter
CDCEx913-Q1 Programmable 1-PLL VCXO Clock Synthesizer With 1.8-V, 2.5-V, and 3.3-V Outputs datasheet
PDF, 1.5 Mb, Revision: C, Datei veröffentlicht: Nov 9, 2016
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 14 |
Package Type | PW |
Industry STD Term | TSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 2000 |
Carrier | LARGE T&R |
Device Marking | CE913Q |
Width (mm) | 4.4 |
Length (mm) | 5 |
Thickness (mm) | 1 |
Pitch (mm) | .65 |
Max Height (mm) | 1.2 |
Mechanical Data | Herunterladen |
Parameter
Input Level | Crystal,LVCMOS |
Number of Outputs | 3 |
Operating Temperature Range | -40 to 125 C |
Output Frequency(Max) | 230 MHz |
Output Level | LVCMOS |
Package Group | TSSOP |
Package Size: mm2:W x L | 14TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG |
Special Features | Integrated EEPROM,I2C,Pin Programming,Spread Spectrum Clocking (SSC) |
VCC Out | 3.3 V |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: CDCE913PERF-EVM
CDCE913 Performance Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: CDCEL9XXPROGEVM
CDCE(L)949 Family EEPROM Programming Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Crystal or Crystal Oscillator Replacement with Silicon DevicesPDF, 894 Kb, Datei veröffentlicht: Jun 18, 2014
This application report is a general guide that outlines the advantages of using silicon-based timingdevices from Texas Instruments to generate system clocking solutions. This report covers theconventional way to derive system clocks using crystals and crystal oscillators, disadvantages of usingthese mechanical components, and details on replacing them with silicon-based timing devices from - General I2C / EEPROM usage for the CDCE(L)9xx familyPDF, 40 Kb, Datei veröffentlicht: Jan 26, 2010
- VCXO Application Guideline for CDCE(L)9xx Family (Rev. A)PDF, 107 Kb, Revision: A, Datei veröffentlicht: Apr 23, 2012
- Practical consideration on choosing a crystal for CDCE(L)9xx familyPDF, 60 Kb, Datei veröffentlicht: Mar 24, 2008
- Usage of I2C for CDCE(L)949, CDCE(L)937, CDCE(L)925, CDCE(L)913PDF, 297 Kb, Datei veröffentlicht: Sep 23, 2009
This document presents a method to smoothly change frequency by IВІCв„ў protocol on Texas Instruments CDCE(L)949, CDCE(L)937, CDCE(L)925, CDCE(L)913 Clock Synthesizers, thus avoiding unnecessary intermediate frequencies. It also includes a code example to generate the IВІC protocol for the CDCE(L)9xx with the TMS320C645x. - Generating Low Phase-Noise Clocks for Audio Data Converters from Low FrequencyPDF, 860 Kb, Datei veröffentlicht: Mar 31, 2008
Generating a high-frequency system clock Fs (128fs to 768fs) from a low-frequency sampling clock fs (10 kHz to 200 kHz) is challenging, while attempting to maintain low phase jitter. A traditional phase-lock loop (PLL) can do the frequency translation, but the added phase jitter prevents the generated system clock signal from effectively driving high-performance audio data converters. This applica - Troubleshooting I2C Bus ProtocolPDF, 184 Kb, Datei veröffentlicht: Oct 19, 2009
When using the I2Cв„ў bus protocol, the designer must ensure that the hardware complies with the I2C standard. This application report describes the I2C protocol and provides guidelines on debugging a missing acknowledgment, selecting the pullup resistors, or meeting the maximum capacitance load of an I2C bus. A conflict occurs if devices sharing the I2C bus have the same slave address. This
Modellreihe
Serie: CDCE913-Q1 (1)
- CDCE913QPWRQ1
Herstellerklassifikation
- Semiconductors > Clock and Timing > Clock Generators > General Purpose