Datasheet Texas Instruments BQ27010 — Datenblatt

HerstellerTexas Instruments
SerieBQ27010

Li-Ionen- und Li-Pol-Batterie-Gasanzeige-IC für tragbare Anwendungen (bqJUNIOR)

Datenblätter

Li-Ion and Li-Pol Battery Gas Gauge IC for Portable Apps (bqJUNIOR) datasheet
PDF, 1.0 Mb, Revision: B, Datei veröffentlicht: Jan 16, 2007
Auszug aus dem Dokument

Preise

Status

BQ27010DRKRBQ27010DRKRG4
Lifecycle StatusNRND (Not recommended for new designs)NRND (Not recommended for new designs)
Manufacture's Sample AvailabilityNoNo

Verpackung

BQ27010DRKRBQ27010DRKRG4
N12
Pin1010
Package TypeDRKDRK
Industry STD TermVSONVSON
JEDEC CodeS-PDSO-NS-PDSO-N
Package QTY30003000
CarrierLARGE T&RLARGE T&R
Device Marking2701027010
Width (mm)33
Length (mm)44
Thickness (mm).88.88
Pitch (mm).5.5
Max Height (mm)11
Mechanical DataHerunterladenHerunterladen

Öko-Plan

BQ27010DRKRBQ27010DRKRG4
RoHSCompliantCompliant

Anwendungshinweise

  • Configuring the bq27010/210 for Gas Gauge Applications
    PDF, 252 Kb, Datei veröffentlicht: Feb 23, 2007
    Accurate performance of the bq27x10 gas gauge requires that the 10 user-configurable EEPROM coefficients be programmed to values that reflect the appropriate host system and battery characteristics. This application report provides the basis for determining the optimal EEPROM coefficients from the host system operational characteristics and battery characterization data. Appendix A specifically ad
  • Transition From Prior bqJunior Gauges to the bq27x10
    PDF, 64 Kb, Datei veröffentlicht: Jul 17, 2007
  • Using the bq27x00 With a Primary Cell Battery
    PDF, 42 Kb, Datei veröffentlicht: Dec 15, 2005
    The bq27x00 is an accurate coulomb counter and contains algorithms to dynamically compensate the available capacity for temperature and discharge rate. If direct drive from the gauge to an LED display is not required, the bq27x00 can be used as an accurate gas gauge solution for a primary cell battery. Although the bq27x00 was designed for a single-cell rechargeable lithium-ion or lithium-polymer
  • Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using the bqJunior
    PDF, 58 Kb, Datei veröffentlicht: May 26, 2006
    The bqJuniorв„ў series of gas gauges are designed to operate from a single-cell, lithium-ion or lithium-polymer battery. Many applications that could benefit from using these gas gauges use two or more lithium cells in series, where the battery voltage exceeds the operating voltage for the bqJuniorв„ў gas gauges. This application report describes a low-component count solution for using th
  • Building a Superior Battery Monitor with the bq27x00
    PDF, 43 Kb, Datei veröffentlicht: Jun 20, 2005
    The bq27x00 is a complete gas gauge solution for lithium-ion and lithium-polymer batteries. The bq27x00 also has internal registers and control commands that enable the host to use it as a battery monitor. A battery gas gauge solution can be built one of two ways: ignore all algorithms built into the bq27x00 and use the primitive functions to build a fully customized solution, or use some of the h
  • Battery Authentication and Security Schemes (Rev. A)
    PDF, 52 Kb, Revision: A, Datei veröffentlicht: Jul 17, 2014
  • HDQ Communication Basics (Rev. A)
    PDF, 103 Kb, Revision: A, Datei veröffentlicht: Sep 18, 2008
    This report compares the communication timing specifications for the different battery gas gauge and battery monitor products. It discusses some of the interface requirements necessary for robust HDQ communication, such as the need for a break prior to each communication, how to reliably read 16-bit dynamic values over the 8-bit bus, and the need for some noise filtering on the HDQ line. It also
  • ESD and RF Mitigation in Handheld Battery Pack Electronics
    PDF, 68 Kb, Datei veröffentlicht: Mar 6, 2008
    It is imperative to protect the electronics in a consumer-removable battery pack from ESD damage. Even an upset without permanent damage may be unacceptable to the end-user. Handheld equipment that contains a transmitter also may require protection to guard against improper measurement and/or upset due to the affect of the radio frequency (RF) on the circuitry. Because the RF field strength varies
  • Feature Set Comparison of bq27x00, bq27x10, bq27500, and bq27510 (Rev. A)
    PDF, 65 Kb, Revision: A, Datei veröffentlicht: Dec 2, 2008
    Feature Set Comparison of bq27x00, bq27x10, bq27500 and bq27510
  • Single Cell Impedance Track Printed-Circuit Board Layout
    PDF, 403 Kb, Datei veröffentlicht: Feb 22, 2008
    bq20z70/90 Printed-Circuit Board Layout Guide
  • Single Cell Gas Gauge Circuit Design
    PDF, 154 Kb, Datei veröffentlicht: Feb 22, 2008
  • MSP430 Microcontroller SW for Handheld Fuel Gauges and Battery Authentication (Rev. A)
    PDF, 350 Kb, Revision: A, Datei veröffentlicht: May 26, 2010
    MSP430, bq26100, bq26100EVM, bq26150, bq26150EVM, bq26500, bq27000, bq27000EVM, bq27200, b MSP430 Microcontroller Software for Handheld Fuel Gauge & Battery Authentication

Modellreihe

Serie: BQ27010 (2)

Herstellerklassifikation

  • Semiconductors> Power Management> Battery Management Products> Battery Fuel Gauge