Datasheet Texas Instruments ADC12D1000 — Datenblatt
Hersteller | Texas Instruments |
Serie | ADC12D1000 |
12-Bit-, Dual 1.0-GSPS- oder Single 2.0-GSPS-Analog-Digital-Wandler (ADC)
Datenblätter
ADC12D1x00 12-Bit, 2.0/3.2 GSPS Ultra High-Speed ADC datasheet
PDF, 3.6 Mb, Revision: N, Datei veröffentlicht: Aug 31, 2015
Auszug aus dem Dokument
Preise
Status
ADC12D1000CIUT | ADC12D1000CIUT/NOPB | |
---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | No |
Verpackung
ADC12D1000CIUT | ADC12D1000CIUT/NOPB | |
---|---|---|
N | 1 | 2 |
Pin | 292 | 292 |
Package Type | NXA | NXA |
Industry STD Term | BGA | BGA |
JEDEC Code | S-PBGA-N | S-PBGA-N |
Package QTY | 40 | 40 |
Carrier | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) |
Device Marking | ADC12D1000CIUT | ADC12D1000CIUT |
Width (mm) | 27 | 27 |
Length (mm) | 27 | 27 |
Thickness (mm) | 2.38 | 2.38 |
Pitch (mm) | 1.27 | 1.27 |
Max Height (mm) | 2.4 | 2.4 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
Parameters / Models | ADC12D1000CIUT | ADC12D1000CIUT/NOPB |
---|---|---|
# Input Channels | 2,1 | 2,1 |
Analog Input BW, MHz | 2800 | 2800 |
Architecture | Folding Interpolating | Folding Interpolating |
DNL(Max), +/-LSB | 0.4 | 0.4 |
DNL(Typ), +/-LSB | 0.4 | 0.4 |
ENOB, Bits | 9.6 | 9.6 |
INL(Max), +/-LSB | 2.5 | 2.5 |
INL(Typ), +/-LSB | 2.5 | 2.5 |
Input Buffer | Yes | Yes |
Input Range, Vp-p | 0.8 | 0.8 |
Interface | Parallel LVDS | Parallel LVDS |
Operating Temperature Range, C | -40 to 85 | -40 to 85 |
Package Group | BGA | BGA |
Package Size: mm2:W x L, PKG | 292BGA: 729 mm2: 27 x 27(BGA) | 292BGA: 729 mm2: 27 x 27(BGA) |
Power Consumption(Typ), mW | 3380 | 3380 |
Rating | Catalog | Catalog |
Reference Mode | Int | Int |
Resolution, Bits | 12 | 12 |
SFDR, dB | 71 | 71 |
SINAD, dB | 59.7 | 59.7 |
SNR, dB | 60.2 | 60.2 |
Sample Rate(Max), MSPS | 1000,2000 | 1000,2000 |
Öko-Plan
ADC12D1000CIUT | ADC12D1000CIUT/NOPB | |
---|---|---|
RoHS | See ti.com | Compliant |
Anwendungshinweise
- From Sample Instant to Data Output: Understanding Latency in the GSPS ADCPDF, 392 Kb, Datei veröffentlicht: Dec 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products, - Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of MitigatPDF, 720 Kb, Datei veröffentlicht: Dec 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12 - AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)PDF, 60 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development. - AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)PDF, 1.7 Mb, Revision: A, Datei veröffentlicht: Apr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver. - AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)PDF, 169 Kb, Revision: G, Datei veröffentlicht: Feb 3, 2017
Modellreihe
Serie: ADC12D1000 (2)
Herstellerklassifikation
- Semiconductors> Data Converters> Analog-to-Digital Converters (ADCs)> High Speed ADCs (>10MSPS)