Datasheet Texas Instruments LMP7731MA/NOPB — Datenblatt
Hersteller | Texas Instruments |
Serie | LMP7731 |
Artikelnummer | LMP7731MA/NOPB |
2,9 nV / sqrt (Hz) Rauscharmer, präziser RRIO-Verstärker 8-SOIC
Datenblätter
LMP7731 2.9 nV/sqrt(Hz) Low Noise, Precision, RRIO Amplifier datasheet
PDF, 1.1 Mb, Revision: E, Datei veröffentlicht: Mar 27, 2013
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 8 | 8 |
Package Type | D | D |
Industry STD Term | SOIC | SOIC |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 95 | 95 |
Carrier | TUBE | TUBE |
Device Marking | LMP77 | 31MA |
Width (mm) | 3.91 | 3.91 |
Length (mm) | 4.9 | 4.9 |
Thickness (mm) | 1.58 | 1.58 |
Pitch (mm) | 1.27 | 1.27 |
Max Height (mm) | 1.75 | 1.75 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
Additional Features | N/A |
Architecture | Bipolar |
CMRR(Min) | 101 dB |
CMRR(Typ) | 120 dB |
GBW(Typ) | 22 MHz |
Input Bias Current(Max) | 50000 pA |
Iq per channel(Max) | 3 mA |
Iq per channel(Typ) | 2.2 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 0.5 uV/C |
Operating Temperature Range | -40 to 125 C |
Output Current(Typ) | 47 mA |
Package Group | SOIC |
Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
Rail-to-Rail | In,Out |
Rating | Catalog |
Slew Rate(Typ) | 2.4 V/us |
Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 2.9 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: AFE2256EVM
AFE2256 Evaluation Module for 256-Channel Analog Front End for Digital X-Ray Flat Panel Detectors
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-1873 DC Parameters (Rev. A)PDF, 91 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
This application report discusses the DC parameters. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
Modellreihe
Serie: LMP7731 (5)
- LMP7731MA/NOPB LMP7731MAX/NOPB LMP7731MF/NOPB LMP7731MFE/NOPB LMP7731MFX/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps