Datasheet Texas Instruments TLC4502CDG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLC4502 |
| Artikelnummer | TLC4502CDG4 |
Advanced LinEPIC Selbstkalibrierender Präzisions-Doppelbetriebsverstärker 8-SOIC 0 bis 70
Datenblätter
Family of Self-Calibrating (Self-Cal) Precision CMOS Rail-to-Rail Output Op Amps datasheet
PDF, 1.2 Mb, Revision: B, Datei veröffentlicht: Apr 2, 2001
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | 4502C |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | Shutdown |
| Architecture | CMOS |
| CMRR(Min) | 90 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 4.7 MHz |
| Input Bias Current(Max) | 60 pA |
| Iq per channel(Max) | 1.5 mA |
| Iq per channel(Typ) | 1 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 1 uV/C |
| Operating Temperature Range | -40 to 125,0 to 70 C |
| Output Current(Typ) | 66 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 2.5 V/us |
| Total Supply Voltage(Max) | 6 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 4 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 12 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.02 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- TLC4501 and TLC4502 EMI Immunity PerformancePDF, 88 Kb, Datei veröffentlicht: Dec 31, 2013
- DC Parameters: Input Offset VoltagePDF, 295 Kb, Datei veröffentlicht: Mar 27, 2001
The input offset voltage, VIO, is a common dc parameter in operational amplifier (op amp) specifications. This report aims to familiarize the engineer by discussing the basics and modern aspects of VIO by providing a definition and a detailed explaination of causes of VIO for BJT, BiFET, and CMOS devices. Discussion centers around measurement techniques, data sheet specifications, and the effect o - Using References to Generate Offsets for the TLC55xx Family Data Converters (Rev. A)PDF, 72 Kb, Revision: A, Datei veröffentlicht: Jul 29, 2002
This application report describes the process for using references to generate offsets for Texas Instrument?s TLC55XX family data converters. - Choosing an ADC and Op Amp for Minimum OffsetPDF, 72 Kb, Datei veröffentlicht: Oct 28, 1999
Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi - Use of Rail-to-Rail Operational Amplifiers (Rev. A)PDF, 159 Kb, Revision: A, Datei veröffentlicht: Dec 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.
Modellreihe
Serie: TLC4502 (12)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps