Datasheet Texas Instruments LM1084IS-ADJ — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM1084 |
| Artikelnummer | LM1084IS-ADJ |
5A Linearregler mit festem / einstellbarem Ausgang 3-DDPAK / TO-263 -40 bis 125
Datenblätter
LM1084 5-A Low Dropout Positive Regulators datasheet
PDF, 2.2 Mb, Revision: G, Datei veröffentlicht: Jan 9, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 3 | 3 |
| Package Type | KTT | KTT |
| Industry STD Term | TO-263 | TO-263 |
| JEDEC Code | R-PSFM-G | R-PSFM-G |
| Package QTY | 45 | 45 |
| Carrier | TUBE | TUBE |
| Device Marking | IS-ADJ | LM1084 |
| Width (mm) | 8.41 | 8.41 |
| Length (mm) | 10.18 | 10.18 |
| Thickness (mm) | 4.44 | 4.44 |
| Pitch (mm) | 2.54 | 2.54 |
| Max Height (mm) | 4.83 | 4.83 |
| Mechanical Data | Herunterladen | Herunterladen |
Ersatz
| Replacement | LM1084IS-ADJ/NOPB |
| Replacement Code | S |
Parameter
| Accuracy | 1.5 % |
| Fixed Output Options | 3.3,5 V |
| Iout(Max) | 5.5 A |
| Iq(Typ) | 5 mA |
| Noise | 38 uVrms |
| Operating Temperature Range | -40 to 125 C |
| Output Capacitor Type | Non-Ceramic |
| Output Options | Adjustable Output,Fixed Output |
| PSRR @ 100KHz | 30 dB |
| Package Group | DDPAK/TO-263 |
| Package Size: mm2:W x L | 3DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) PKG |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | N/A |
| Thermal Resistance ОёJA | 23 В°C/W |
| Vdo(Typ) | 1300 mV |
| Vin(Max) | 29 V |
| Vin(Min) | 2.6 V |
| Vout(Max) | 27.5 V |
| Vout(Min) | 1.25 V |
Öko-Plan
| RoHS | See ti.com |
Anwendungshinweise
- A Topical Index of TI LDO Application Notes (Rev. F)PDF, 82 Kb, Revision: F, Datei veröffentlicht: Jun 27, 2019
- Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)PDF, 509 Kb, Revision: A, Datei veröffentlicht: Jun 4, 2008
- Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)PDF, 284 Kb, Revision: A, Datei veröffentlicht: May 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet. - AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)PDF, 300 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
This application note discusses the operation and compensation of linear regulators. - AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)PDF, 814 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t - Understanding the Terms and Definitions of LDO Voltage RegulatorsPDF, 197 Kb, Datei veröffentlicht: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab - Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, Datei veröffentlicht: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
Modellreihe
Serie: LM1084 (10)
Herstellerklassifikation
- Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
Andere Namen:
LM1084ISADJ, LM1084IS ADJ