Datasheet Texas Instruments TLV2362IDGKR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLV2362 |
| Artikelnummer | TLV2362IDGKR |
Dualer Hochleistungs- und Niederspannungs-Operationsverstärker 8-VSSOP -40 bis 85
Datenblätter
High-Performance Low-Voltage Operational Amplifiers datasheet
PDF, 1.3 Mb, Revision: H, Datei veröffentlicht: Jun 27, 2007
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 | 8 | 8 |
| Package Type | DGK | DGK | DGK |
| Industry STD Term | VSSOP | VSSOP | VSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | YBL | YBS | YBU |
| Width (mm) | 3 | 3 | 3 |
| Length (mm) | 3 | 3 | 3 |
| Thickness (mm) | .97 | .97 | .97 |
| Pitch (mm) | .65 | .65 | .65 |
| Max Height (mm) | 1.07 | 1.07 | 1.07 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 85 dB |
| CMRR(Typ) | 60 dB |
| GBW(Typ) | 7 MHz |
| Input Bias Current(Max) | 150000 pA |
| Iq per channel(Max) | 2.5 mA |
| Iq per channel(Typ) | 1.75 mA |
| Number of Channels | 2 |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 1.2 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 3 V/us |
| Total Supply Voltage(Max) | 5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 6 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)PDF, 197 Kb, Revision: A, Datei veröffentlicht: Mar 12, 2001
This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation. - Conditioning a Switch-mode Power Supply Current Signal Using TI Op AmpsPDF, 61 Kb, Datei veröffentlicht: Mar 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp. - Use of Rail-to-Rail Operational Amplifiers (Rev. A)PDF, 159 Kb, Revision: A, Datei veröffentlicht: Dec 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.
Modellreihe
Serie: TLV2362 (9)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps