Datasheet Texas Instruments THS4505DR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | THS4505 |
| Artikelnummer | THS4505DR |
Breitbandiger, verzerrungsarmer volldifferenzieller Verstärker 8-SOIC -40 bis 85
Datenblätter
Wideband, Low-Distortion, Fully Differential Amplifiers datasheet
PDF, 1.5 Mb, Revision: D, Datei veröffentlicht: May 15, 2008
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | 4505 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 79 dBc |
| 3rd Harmonic | 93 dBc |
| @ MHz | 8 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Fully Differential |
| BW @ Acl | 260 MHz |
| CMRR(Min) | 74 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 210 MHz |
| Input Bias Current(Max) | 4600000 pA |
| Iq per channel(Max) | 20 mA |
| Iq per channel(Typ) | 16 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 130 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 1800 V/us |
| Total Supply Voltage(Max) | 15 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 4.5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 21 nV/rtHz |
| Vn at Flatband(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: THS4505EVM
THS4505 Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS7530EVM
THS7530 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: THS4505 (9)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)