Datasheet Texas Instruments TL1451AQDR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TL1451A |
| Artikelnummer | TL1451AQDR |
Zweikanalregler mit breitem Eingangsspannungsbereich 16-SOIC -40 bis 125
Datenblätter
Dual Pulse-Width-Modulation Control Circuits datasheet
PDF, 1.2 Mb, Revision: E, Datei veröffentlicht: Mar 13, 2002
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 16 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | TL1451AQ |
| Width (mm) | 3.91 |
| Length (mm) | 9.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Duty Cycle(Max) | 100 % |
| Iout(Max) | 3 A |
| Iq(Typ) | 1.7 mA |
| Operating Temperature Range | -20 to 85,-40 to 125 C |
| Package Group | SOIC |
| Rating | Catalog |
| Special Features | N/A |
| Switch Current Limit(Min) | 3 A |
| Switching Frequency(Max) | 500 kHz |
| Switching Frequency(Min) | 50 kHz |
| Topology | Boost,Buck,Flyback,Forward,Inverting,SEPIC |
| Type | Controller |
| Vin(Max) | 50 V |
| Vin(Min) | 3.6 V |
| Vout(Max) | 50 V |
| Vout(Min) | 1 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TL1451AEVM-166
Dual PWM Control Circuit
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Understanding Buck Power Stages In Switchmode Power SuppliesPDF, 173 Kb, Datei veröffentlicht: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the buck power stage only and does not cover control circuits. Detailed steady-state and small-signal analysis of the buck power stage operating in continuous - Understanding Boost Power Stages In Switchmode Power SuppliesPDF, 149 Kb, Datei veröffentlicht: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the boost power stage only and does not cover control circuits. The report includes detailed steady-stage and small-signal analysis of the boost power stage o - Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - Understanding Buck-Boost Power Stages in Switchmode Power Supplies (Rev. A)PDF, 363 Kb, Revision: A, Datei veröffentlicht: May 28, 2002
Modellreihe
Serie: TL1451A (16)
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost or Inverting Controller (External Switch)