Datasheet Texas Instruments UCC28250RGPT — Datenblatt
Hersteller | Texas Instruments |
Serie | UCC28250 |
Artikelnummer | UCC28250RGPT |
Erweiterter PWM-Controller mit Pre-Bias-Betrieb 20-QFN -40 bis 125
Datenblätter
UCC28250 Advanced PWM Controller With Prebias Operation datasheet
PDF, 1.8 Mb, Revision: D, Datei veröffentlicht: Jun 28, 2015
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 20 |
Package Type | RGP |
Industry STD Term | VQFN |
JEDEC Code | S-PQFP-N |
Package QTY | 250 |
Carrier | SMALL T&R |
Device Marking | 28250 |
Width (mm) | 4 |
Length (mm) | 4 |
Thickness (mm) | .93 |
Pitch (mm) | .5 |
Max Height (mm) | 1 |
Mechanical Data | Herunterladen |
Parameter
Control Method | Current,Voltage |
Duty Cycle(Max) | 100 % |
Frequency(Max) | 1000 kHz |
Frequency(Min) | 40 kHz |
Gate Drive(Typ) | 0.2 A |
Operating Temperature Range | -40 to 125 C |
Package Group | QFN |
Rating | Catalog |
Special Features | HV Start-up |
Topology | Forward,Full-Bridge,Half-Bridge,Push-Pull |
UVLO Thresholds On/Off | 4.3/4.1 V |
Vin(Max) | 20 V |
Vin(Min) | 4.3 V |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: UCC28250EVM-564
Evaluation Module for UCC28250 Adv.PWM Controller w/ Pre-biased Load Op. on Secondary Side Control
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: UCC28250EVM-501
Evaluation Module for UCC28250 Advanced PWM Controller on Primary Side Control
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Designing UCC28250 as a Secondary Side Control with a Pre-Bias ConditionPDF, 395 Kb, Datei veröffentlicht: Nov 24, 2010
This application note addresses the considerations for using the UCC28250 as a secondary side controller. With voltage mode control, the UCC28250 can be used in a design that produces smooth turn-on performance with an output pre-bias condition. The design guidelines are summarized from various performance tests and examined particularly on a 100-W, dc-dc half bridge converter. This converter is d - Differences Between the UCC28251 and UCC28250 and Evaluation of the UCC28251 in (Rev. A)PDF, 36 Kb, Revision: A, Datei veröffentlicht: Feb 15, 2013
The UCC28251 is a functional variant of the UCC28250 PWM Controller. While the same basic functionality of the UCC28250 is largely maintained, the UCC28251 is designed to operate at a lower frequency (minimum of 27 kHz when programmed by RT pin) allowing operation in 400-V input DC-to-DC converters in off-line AC-to-DC power supplies, where frequency-dependent high-voltage switching lossesare an
Modellreihe
Serie: UCC28250 (4)
- UCC28250PW UCC28250PWR UCC28250RGPR UCC28250RGPT
Herstellerklassifikation
- Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > PWM and Resonant Controller