Datasheet Texas Instruments SN74CBT6800APWRG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | SN74CBT6800A |
| Artikelnummer | SN74CBT6800APWRG4 |
10-Bit-FET-Busschalter mit vorgeladenen Ausgängen 24-TSSOP -40 bis 85
Datenblätter
10-Bit FET Bus Switch With Precharged Outputs datasheet
PDF, 752 Kb, Revision: N, Datei veröffentlicht: Mar 15, 2001
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 24 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | CT6800A |
| Width (mm) | 4.4 |
| Length (mm) | 7.8 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | Pre-charged signal path |
| Bandwidth | 200 MHz |
| Configuration | 1:1 SPST |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 128 mA |
| Input/Output OFF-state Capacitance(Typ) | 4.5 pF |
| Number of Channels | 10 |
| OFF-state leakage current(Max) | 5 µA |
| ON-state leakage current(Max) | 5 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 24TSSOP: 50 mm2: 6.4 x 7.8(TSSOP) PKG |
| Rating | Catalog |
| Ron(Max) | 20 Ohms |
| Ron(Typ) | 3 Ohms |
| Supply Current(Max) | 3 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 2 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 4 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- FET Switches in Docking StationsPDF, 92 Kb, Datei veröffentlicht: Jul 23, 2003
Docking stations for portable electronics require the capability to connect a system with a live-running bus to a disabled or powered-down system. This hot-docking event must not cause any electrical damage, electrical signal glitches, or data corruption. This application report explains the use of TI FET bus-switch products with precharge to accomplish this connection. - Flexible Voltage-Level Translation With CBT Family DevicesPDF, 40 Kb, Datei veröffentlicht: Jul 20, 1999
Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency. - 5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)PDF, 35 Kb, Revision: B, Datei veröffentlicht: Mar 1, 1997
The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not - 3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)PDF, 32 Kb, Revision: A, Datei veröffentlicht: Apr 3, 1998
- VOLTAGE LEVEL TRANSLATION (SL) - FamilyPDF, 111 Kb, Datei veröffentlicht: Sep 21, 2011
- Bus FET Switch Solutions for Live Insertion ApplicationsPDF, 300 Kb, Datei veröffentlicht: Feb 7, 2003
In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ
Modellreihe
Serie: SN74CBT6800A (4)
- SN74CBT6800ADW SN74CBT6800ADWR SN74CBT6800APWR SN74CBT6800APWRG4
Herstellerklassifikation
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes