Datasheet Texas Instruments LM324N/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM324-N |
| Artikelnummer | LM324N/NOPB |
Low Power Quad Operationsverstärker 14-PDIP 0 bis 70
Datenblätter
LMx24-N, LM2902-N Low-Power, Quad-Operational Amplifiers datasheet
PDF, 1.9 Mb, Revision: D, Datei veröffentlicht: Jan 26, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 14 |
| Package Type | NFF |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | LM324N |
| Width (mm) | 6.35 |
| Length (mm) | 19.177 |
| Thickness (mm) | 3.429 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.33 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 65 dB |
| CMRR(Typ) | 85 dB |
| GBW(Typ) | 1 MHz |
| IIB(Max) | 100000 pA |
| Iq per channel(Max) | 0.3 mA |
| Iq per channel(Typ) | 0.18 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 20 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 32 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 40 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits. - AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)PDF, 371 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or - Mounting of Surface Mount Components (Rev. B)PDF, 5.8 Mb, Revision: B, Datei veröffentlicht: Apr 23, 2013
Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components. - AN-666 DTMF Generation with 3.58 MHz CrystalPDF, 798 Kb, Datei veröffentlicht: May 14, 2004
- Get More Power Out of Dual or Quad Op-AmpsPDF, 91 Kb, Datei veröffentlicht: Oct 2, 2002
Modellreihe
Serie: LM324-N (13)
Herstellerklassifikation
- Semiconductors > Space & High Reliability > Amplifier > Operational Amplifiers