Datasheet Texas Instruments MSP430F67651AIPZR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | MSP430F67651A |
| Artikelnummer | MSP430F67651AIPZR |
MSP430F67651A Mixed-Signal-Mikrocontroller 100-LQFP -40 bis 85
Datenblätter
MSP430F677x1A, MSP430F676x1A, MSP430F674x1A Polyphase Metering SoCs datasheet
PDF, 2.9 Mb, Datei veröffentlicht: May 28, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 100 |
| Package Type | PZ |
| Industry STD Term | LQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | F67651A |
| Width (mm) | 14 |
| Length (mm) | 14 |
| Thickness (mm) | 1.4 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.6 |
| Mechanical Data | Herunterladen |
Parameter
| ADC | ADC10 - 6ch,SigmaDelta24 - 6ch |
| AES | N/A |
| Active Power | 346.8 uA/MHz |
| Additional Features | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA |
| BSL | UART |
| CPU | MSP430 |
| DMA | 3 |
| Featured | f6 |
| Frequency | 25 MHz |
| GPIO Pins | 90 |
| I2C | 2 |
| Max VCC | 3.6 |
| Min VCC | 1.8 |
| Multiplier | 32x32 |
| Non-volatile Memory | 128 KB |
| Operating Temperature Range | -40 to 85 C |
| Package Group | LQFP |
| Package Size: mm2:W x L | 100LQFP: 256 mm2: 16 x 16(LQFP) PKG |
| RAM | 16 KB |
| Rating | Catalog |
| SPI | 6 |
| Special I/O | N/A |
| Standby Power | 2.9 LPM3-uA |
| Timers - 16-bit | 4 |
| UART | 4 |
| Wakeup Time | 5 us |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Development Kits: MSP-TS430PEU128
MSP-TS430PEU128 - 128-pin Target Development Board for MSP430F6x MCUs
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EVM430-F6779
EVM430-F6779 - 3 Phase Electronic Watt-Hour EVM for Metering
Lifecycle Status: Active (Recommended for new designs) - Development Kits: MSP-FET430U128
128-pin Target Development Board and MSP-FET Programmer Bundle for MSP430F6x MCUs
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: ENERGYTRACE
MSP EnergyTrace Technology
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Differences Between MSP430F67xx and MSP430F67xxA DevicesPDF, 3.5 Mb, Datei veröffentlicht: Mar 30, 2015
This application report describes the enhancements of the MSP430F67xxA devices from the non-A MSP430F67xx devices. In the course of this application report, the MSP430F67xx errata that are fixed in the MSP430F67xxA and the additional features added to the MSP430F67xxA devices are discussed. In addition, metrology results are compared to further show that the changes implemented in the MSP430F67xxA - Designing With MSP430 and Segment LCDs (Rev. A)PDF, 2.1 Mb, Revision: A, Datei veröffentlicht: Jul 20, 2015
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, Revision: A, Datei veröffentlicht: Apr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
Modellreihe
Serie: MSP430F67651A (4)
- MSP430F67651AIPEU MSP430F67651AIPEUR MSP430F67651AIPZ MSP430F67651AIPZR
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430F5x/6x