Datasheet Texas Instruments CD74ACT257M96 — Datenblatt
Hersteller | Texas Instruments |
Serie | CD74ACT257 |
Artikelnummer | CD74ACT257M96 |
Nichtinvertierende Quad-Multiplexer mit 2 Eingängen und 3-Zustands-Ausgängen 16-SOIC -55 bis 125
Datenblätter
Quad 2-Input Multiplexer with Three-State Outputs datasheet
PDF, 1.1 Mb, Revision: A, Datei veröffentlicht: May 17, 2000
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 16 |
Package Type | D |
Industry STD Term | SOIC |
JEDEC Code | R-PDSO-G |
Package QTY | 2500 |
Carrier | LARGE T&R |
Device Marking | ACT257M |
Width (mm) | 3.91 |
Length (mm) | 9.9 |
Thickness (mm) | 1.58 |
Pitch (mm) | 1.27 |
Max Height (mm) | 1.75 |
Mechanical Data | Herunterladen |
Parameter
Bandwidth | 100 MHz |
Bits | 2 |
Number of Channels | 4 |
Configuration | 2:1 |
Digital input leakage(Max) | 5 uA |
ESD Charged Device Model | 0.75 kV |
ESD HBM | 2 kV |
F @ Nom Voltage(Max) | 90 Mhz |
Function | Encoder/Multiplexer |
ICC @ Nom Voltage(Max) | 0.08 mA |
Operating Temperature Range | -55 to 125 C |
Output Drive (IOL/IOH)(Max) | 24/-24 mA |
Package Group | SOIC |
Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
Rating | Catalog |
Schmitt Trigger | No |
Technology Family | ACT |
Type | 3-State Output |
VCC(Max) | 5.5 V |
VCC(Min) | 4.5 V |
Voltage(Nom) | 5 V |
tpd @ Nom Voltage(Max) | 9.7 ns |
Öko-Plan
RoHS | Compliant |
Anwendungshinweise
- Selecting the Right Level Translation Solution (Rev. A)PDF, 313 Kb, Revision: A, Datei veröffentlicht: Jun 22, 2004
Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati - Using High Speed CMOS and Advanced CMOS in Systems With Multiple VccPDF, 43 Kb, Datei veröffentlicht: Apr 1, 1996
Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren
Modellreihe
Serie: CD74ACT257 (6)
- CD74ACT257E CD74ACT257EE4 CD74ACT257M CD74ACT257M96 CD74ACT257M96G4 CD74ACT257MG4
Herstellerklassifikation
- Semiconductors > Switches and Multiplexers > Buffered Encoders and Decoders