Datasheet Texas Instruments TL497AID — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TL497A |
| Artikelnummer | TL497AID |
500-mA-Peak-Step-Up-, Step-Down- und invertierender Schaltspannungsregler 14-SOIC -40 bis 85
Datenblätter
TL497A datasheet
PDF, 777 Kb, Revision: F, Datei veröffentlicht: Feb 22, 2005
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | TL497AI |
| Width (mm) | 3.91 |
| Length (mm) | 8.65 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Iq(Typ) | 11 mA |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Package Group | SOIC |
| Rating | Catalog |
| Special Features | Enable |
| Switch Current Limit(Min) | 0.5 A |
| Switch Current Limit(Typ) | 0.5 A |
| Switching Frequency(Max) | 50 kHz |
| Topology | Boost,Buck,Flyback,Forward,Inverting,SEPIC |
| Type | Converter |
| Vin(Max) | 12 V |
| Vin(Min) | 4.5 V |
| Vout(Max) | 30 V |
| Vout(Min) | -25 V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Designing Switching Voltage Regulators with TL497APDF, 945 Kb, Datei veröffentlicht: Aug 11, 2003
Switching voltage regulators, represented by the TL497, can achieve high-efficiency power conversion at large input/output voltage differentials. The TL497A eliminates complex circuit designs previously required and provides greater efficiency than systems using series pass regulators. The principle of operation is discussed, and practical design exercises for step-down, step-up, and inverting reg - Understanding Buck Power Stages In Switchmode Power SuppliesPDF, 173 Kb, Datei veröffentlicht: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the buck power stage only and does not cover control circuits. Detailed steady-state and small-signal analysis of the buck power stage operating in continuous - Understanding Boost Power Stages In Switchmode Power SuppliesPDF, 149 Kb, Datei veröffentlicht: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the boost power stage only and does not cover control circuits. The report includes detailed steady-stage and small-signal analysis of the boost power stage o - Understanding Buck-Boost Power Stages in Switchmode Power Supplies (Rev. A)PDF, 363 Kb, Revision: A, Datei veröffentlicht: May 28, 2002
Modellreihe
Serie: TL497A (14)
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)