Datasheet Texas Instruments OPA330AIDR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA330 |
| Artikelnummer | OPA330AIDR |
1,8 V, 35 µA, microPower, Präzision, Zero Drift CMOS-Operationsverstärker 8-SOIC -40 bis 125
Datenblätter
OPAx330 50-ОјV VOS, 0.25-ОјV/В°C, 35-ОјA CMOS Operational Amplifiers Zero-Drift Series datasheet
PDF, 1.8 Mb, Revision: G, Datei veröffentlicht: Aug 11, 2016
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | O330A |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | Zero Drift |
| Architecture | CMOS |
| CMRR(Min) | 100 dB |
| CMRR(Typ) | 115 dB |
| GBW(Typ) | 0.35 MHz |
| Input Bias Current(Max) | 500 pA |
| Iq per channel(Max) | 0.035 mA |
| Iq per channel(Typ) | 0.021 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.02 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 5 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.16 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 55 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.05 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Zero-drift Amplifiers: Features and Benefits (Rev. A)PDF, 131 Kb, Revision: A, Datei veröffentlicht: Feb 9, 2017
- Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. A)PDF, 795 Kb, Revision: A, Datei veröffentlicht: Jul 20, 2017
- Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA330 (13)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps