Datasheet Texas Instruments OPA379AIDBVR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA379 |
| Artikelnummer | OPA379AIDBVR |
1,8 V, 2,9 uA, 90 kHz Rail-to-Rail-E / A-Operationsverstärker 5-SOT-23 -40 bis 125
Datenblätter
1.8V, 2.9µA, 90kHz, Rail-to-Rail I/O Operational Amplifiers datasheet
PDF, 1.5 Mb, Revision: D, Datei veröffentlicht: Jan 8, 2007
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | B53 |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | EMI Hardened |
| Architecture | CMOS |
| CMRR(Min) | 90 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 0.09 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 0.0055 mA |
| Iq per channel(Typ) | 0.0029 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2.7 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 5 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.03 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 80 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1.5 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Supplying TPS61200 With a Single Solar Cell (Rev. B)PDF, 129 Kb, Revision: B, Datei veröffentlicht: Sep 6, 2011
This application report explains how to use the TPS61200 in combination with a single solar cell to charge a battery or storage device. A characteristic of solar cells is the internal resistance that can vary from less than 10 Ω up to more than 100 Ω. Therefore it is important to control the load placed on the solar cell to ensure a reliable start-up of the application. This report describes an a - Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA379 (12)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Ultra-Low-Power Op Amps (<=10uA)