Datasheet Texas Instruments LMC6482IMMX — Datenblatt
Hersteller | Texas Instruments |
Serie | LMC6482 |
Artikelnummer | LMC6482IMMX |
Ultra-Low-Bias-Strom, Präzisions-CMOS-Operationsverstärker von Schiene zu Schiene 8-VSSOP -40 bis 85
Datenblätter
LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier datasheet
PDF, 2.9 Mb, Revision: E, Datei veröffentlicht: Apr 24, 2015
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | NRND (Not recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 8 |
Package Type | DGK |
Industry STD Term | VSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 3500 |
Carrier | LARGE T&R |
Device Marking | A10 |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .97 |
Pitch (mm) | .65 |
Max Height (mm) | 1.07 |
Mechanical Data | Herunterladen |
Ersatz
Replacement | LMC6482IMMX/NOPB |
Replacement Code | S |
Parameter
Additional Features | N/A |
Architecture | CMOS |
CMRR(Min) | 65 dB |
CMRR(Typ) | 82 dB |
GBW(Typ) | 1.5 MHz |
Input Bias Current(Max) | 4 pA |
Iq per channel(Max) | 0.7 mA |
Iq per channel(Typ) | 0.5 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 1 uV/C |
Operating Temperature Range | -40 to 85 C |
Output Current(Typ) | 30 mA |
Package Group | VSSOP |
Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
Rail-to-Rail | In,Out |
Rating | Catalog |
Slew Rate(Typ) | 1.3 V/us |
Total Supply Voltage(Max) | 15.5 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 37 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.75 mV |
Öko-Plan
RoHS | See ti.com |
Anwendungshinweise
- AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)PDF, 194 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
This application report presents part 2 of the flat panel display design guidelines. - AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)PDF, 245 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Modellreihe
Serie: LMC6482 (14)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps