Datasheet Texas Instruments LM3492MH/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM3492 |
| Artikelnummer | LM3492MH/NOPB |
Zweikanaliger, einzeln dimmbarer LED-Treiber mit Aufwärtswandler und schnellem Stromregler 20-HTSSOP -40 bis 125
Datenblätter
LM3492/-Q1 Two-Channel Individual Dimmable LED Driver With Boost Converter and Fast Current Regulator datasheet
PDF, 1.4 Mb, Revision: D, Datei veröffentlicht: Oct 31, 2016
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 20 | 20 |
| Package Type | PWP | PWP |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 73 | 73 |
| Carrier | TUBE | TUBE |
| Device Marking | MH | LM3492 |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 6.5 | 6.5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Dimming Method | PWM |
| Input Voltage | DC/DC Type |
| Iout(Max) | 0.2 A |
| Iq(Typ) | 3.6 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Package Size: mm2:W x L | 20HTSSOP: 42 mm2: 6.4 x 6.5(HTSSOP) PKG |
| Power Factor Correction | N/A Min |
| Rating | Catalog |
| Regulated Outputs | 2 |
| Special Features | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Power Good,Soft Start,Thermal Shutdown |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 200 kHz |
| Topology | Boost,Boost with Current Sink,Multi-Channel |
| Type | Converter,Inductive,Linear |
| Vin(Max) | 65 V |
| Vin(Min) | 4.5 V |
| Vout(Max) | 65 V |
| Vout(Min) | 5 V |
| Vref | 1.25 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LM3492AR111DEMO
LM3492 AR111 LED Bulb Replacement Reference Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3492EVAL
Two Channel Boost Regulator with DHC for LED Backlighting Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-2192 LM3492 12VAC, 7W LED Driver for AR111 Application (Rev. A)PDF, 627 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
The LM3492 demonstration board included in this package is designed for converting nominal 12VACfrom electronic transformer output to drive seven series connected LEDs at 360mA average current. Theend user can directly light up a LED string through the demonstration board from an electronic transformerto test out the performance. With the demonstration board, the LED string not only runs at - AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, Revision: A, Datei veröffentlicht: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
Modellreihe
Serie: LM3492 (2)
- LM3492MH/NOPB LM3492MHX/NOPB
Herstellerklassifikation
- Semiconductors > Power Management > LED Driver > Illumination & General Lighting LED Driver