Datasheet Texas Instruments UCC27211DPRT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | UCC27211 |
| Artikelnummer | UCC27211DPRT |
120-V-Boot, 4-A-Peak, Hochfrequenz-High-Side-Low-Side-Treiber 10-WSON -40 bis 140
Datenblätter
UCC2721x 120-V Boot, 4-A Peak, High-Frequency High-Side and Low-Side Driver datasheet
PDF, 1.6 Mb, Revision: F, Datei veröffentlicht: Dec 18, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 10 | 10 |
| Package Type | DPR | DPR |
| Industry STD Term | WSON | WSON |
| JEDEC Code | S-PDSO-N | S-PDSO-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | 27211 | UCC |
| Width (mm) | 4 | 4 |
| Length (mm) | 4 | 4 |
| Thickness (mm) | .75 | .75 |
| Pitch (mm) | .8 | .8 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Bus Voltage | 110 V |
| Channel Input Logic | TTL |
| Fall Time | 7 ns |
| Input Threshold | TTL |
| Input VCC(Max) | 17 V |
| Input VCC(Min) | 8 V |
| Iq | 1 uA |
| Negative Voltage Handling at HS Pin | -12 V |
| Number of Channels | 2 |
| Operating Temperature Range | -40 to 140 C |
| Package Group | WSON |
| Peak Output Current | 4 A |
| Power Switch | MOSFET,IGBT,GaNFET |
| Prop Delay | 20 ns |
| Rating | Catalog |
| Rise Time | 8 ns |
| Special Features | N/A |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: UCD3138HSFBEVM-029
UCD3138 Hard Switching Full Bridge Converter Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. B)PDF, 358 Kb, Revision: B, Datei veröffentlicht: Jul 17, 2015
The High-Frequency Inverter is mainly used today in uninterruptible power supply systems, AC motor drives, induction heating and renewable energy source systems. The simplest form of an inverter is the bridge-type, where a power bridge is controlled according to the sinusoidal pulse-width modulation (SPWM) principle and the resulting SPWM wave is filtered to produce the alternating output voltage. - Hybrid Battery Charger with Load Control for Telecom EquipmentsPDF, 391 Kb, Datei veröffentlicht: Oct 28, 2014
Modellreihe
Serie: UCC27211 (8)
Herstellerklassifikation
- Semiconductors > Power Management > MOSFET and IGBT Gate Drivers > Half-bridge Driver