Datasheet Texas Instruments UC2577TDKTTT-ADJG3 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | UC2577-ADJ |
| Artikelnummer | UC2577TDKTTT-ADJG3 |
Einfacher Aufwärtsspannungsregler 5-DDPAK / TO-263 -40 bis 125
Datenblätter
UC2577-ADJ: Simple Step-Up Voltage Regulators datasheet
PDF, 366 Kb, Revision: A, Datei veröffentlicht: May 16, 2003
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | KTT |
| Industry STD Term | TO-263 |
| JEDEC Code | R-PSFM-G |
| Package QTY | 50 |
| Carrier | SMALL T&R |
| Device Marking | UC2577TD-ADJ |
| Width (mm) | 8.42 |
| Length (mm) | 10.16 |
| Thickness (mm) | 4.58 |
| Pitch (mm) | 1.7 |
| Max Height (mm) | 4.83 |
| Mechanical Data | Herunterladen |
Parameter
| Duty Cycle(Max) | 100 % |
| Iq(Typ) | 45 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | DDPAK/TO-263 |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | N/A |
| Switch Current Limit(Min) | 3 A |
| Switch Current Limit(Typ) | 4.3 A |
| Switching Frequency(Max) | 52 kHz |
| Switching Frequency(Min) | 52 kHz |
| Type | Converter |
| Vin(Max) | 40 V |
| Vin(Min) | 3 V |
| Vout(Max) | 60 V |
| Vout(Min) | 5 V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - DN-49 UC2577 Controls SEPIC Converter for Automotive ApplicationsPDF, 61 Kb, Datei veröffentlicht: Sep 5, 1999
The Single-Ended Primary Inductance Converter (SEPIC) can convert an input voltage to an output voltage that is higher, lower, or equal to the input. Conversion is performed without the use of expensive transformers, making the SEPIC a good choice for low-cost, non-isolated applications. The UC2577 provides the switch and control to take advantage of this topology with a minimum of additional part
Modellreihe
Serie: UC2577-ADJ (4)
- UC2577T-ADJ UC2577TD-ADJ UC2577TDKTTT-ADJ UC2577TDKTTT-ADJG3
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)
Andere Namen:
UC2577TDKTTTADJG3, UC2577TDKTTT ADJG3