Datasheet Texas Instruments LM2594N-ADJ/NOPB — Datenblatt

Hersteller	Texas Instruments
Serie	LM2594
Artikelnummer	LM2594N-ADJ/NOPB

SIMPLE SWITCHER® 40V, 500mA Abwärtsregler mit niedriger Komponentenzahl 8-PDIP -40 bis 125

Datenblätter

Herunterladen

PDF, 2.2 Mb, Revision: D, Datei veröffentlicht: May 31, 2016

Auszug aus dem Dokument

Preise

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Verpackung

Pin	8	8
Package Type	P	P
Industry STD Term	PDIP	PDIP
JEDEC Code	R-PDIP-T	R-PDIP-T
Package QTY	40	40
Carrier	TUBE	TUBE
Device Marking	LM2594N	-ADJ P+
Width (mm)	6.35	6.35
Length (mm)	9.81	9.81
Thickness (mm)	3.9	3.9
Pitch (mm)	2.54	2.54
Max Height (mm)	5.08	5.08
Mechanical Data	Herunterladen	Herunterladen

Parameter

Control Mode	Voltage Mode
Duty Cycle(Max)	100 %
Iout(Max)	0.5 A
Iq(Typ)	5 mA
Operating Temperature Range	-40 to 125 C
Package Group	PDIP
Rating	Catalog
Regulated Outputs	1
Special Features	Enable
Switching Frequency(Max)	173 kHz
Switching Frequency(Min)	110 kHz
Type	Converter
Vin(Max)	40 V
Vin(Min)	4.5 V
Vout(Max)	37 V
Vout(Min)	3.3 V

Öko-Plan

RoHS

Compliant

Anwendungshinweise

Herunterladen
AN-643 EMI/RFI Board Design (Rev. B)
PDF, 742 Kb, Revision: B, Datei veröffentlicht: May 3, 2004
Application Note 643 EMI/RFI Board Design
Herunterladen
Input and Output Capacitor Selection
PDF, 219 Kb, Datei veröffentlicht: Sep 19, 2005
Herunterladen
AN-1197 Selecting Inductors for Buck Converters (Rev. B)
PDF, 558 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This application report provides design information to help select an off-the-shelf inductor for anycontinuous-mode buck converter application.
Herunterladen
AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
PDF, 3.6 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
Herunterladen
AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)
PDF, 1.4 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
This application note provides thermal power analysis techniques for analyzing the power IC.
Herunterladen
AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
PDF, 2.7 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
Herunterladen
Semiconductor and IC Package Thermal Metrics (Rev. C)
PDF, 201 Kb, Revision: C, Datei veröffentlicht: Apr 19, 2016
Herunterladen
AN-1118 Simple Regulator Provides +/-12 V From 5-V Source (Rev. D)
PDF, 94 Kb, Revision: D, Datei veröffentlicht: Apr 23, 2013
Many systems require a В±12 V power supply. Typical examples include analog circuits or RS-232 driverpower supplies. The В±12 V typically needs to be generated from a 5 V system bus. The solutions normallyused involve a multiple secondary transformer or multiple switching regulators. These solutions can becomplicated, may require custom transformer design and may have poor efficiency and poor
Herunterladen
Buck Converters Provide a Battery Charger and System Power
PDF, 61 Kb, Datei veröffentlicht: Mar 21, 2007
Herunterladen
Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)
PDF, 512 Kb, Revision: A, Datei veröffentlicht: Sep 12, 2014
Printed Circuit Board (PCB) layout for Switched Mode Power Supplies (SMPS) is critical to achieve proper converter operation good thermal performance and excellent radiated EMI performance. Optimized board layout for low radiated EMI is made very simple by the package and pin arrangement of the SIMPLE SWITCHER Synchronous Buck Converter family LM4360x and LM4600x
Herunterladen
Simple Techniques Minimize Cross-Coupling in Distributed Power Systems
PDF, 335 Kb, Datei veröffentlicht: Mar 21, 2007
Herunterladen
AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
PDF, 82 Kb, Revision: C, Datei veröffentlicht: Apr 23, 2013
When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
Herunterladen
AN-1081 Low-Cost Low-Parts-Count DC/DC Converter With Multiple Outputs (Rev. B)
PDF, 124 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This application report describes a simple low cost, low parts-count multiple output DC/DC converterbased on the LM2596 five terminal step-down switching regulator. The circuit described provides multipleoutput voltages (positive and negative) with good regulation using a step-down converter circuit withflyback windings. It uses only one switching regulator IC.
Herunterladen
AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
PDF, 374 Kb, Revision: C, Datei veröffentlicht: Apr 23, 2013
This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
Herunterladen
AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
PDF, 2.5 Mb, Revision: C, Datei veröffentlicht: Apr 24, 2013
Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
Herunterladen
AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)
PDF, 427 Kb, Revision: C, Datei veröffentlicht: Apr 23, 2013
This application note discusses stresses in wide input DC-DC converters.
Herunterladen
AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
PDF, 9.2 Mb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

Modellreihe

Serie: LM2594 (14)

LM2594M-12/NOPB LM2594M-3.3 LM2594M-3.3/NOPB LM2594M-5.0 LM2594M-5.0/NOPB LM2594M-ADJ/NOPB LM2594MX-12/NOPB LM2594MX-3.3/NOPB LM2594MX-5.0/NOPB LM2594MX-ADJ/NOPB LM2594N-12/NOPB LM2594N-3.3/NOPB LM2594N-5.0/NOPB LM2594N-ADJ/NOPB

Herstellerklassifikation

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)

Andere Namen:

LM2594NADJ/NOPB, LM2594N ADJ/NOPB