Datasheet Texas Instruments UCC3817DWG4 — Datenblatt
Hersteller | Texas Instruments |
Serie | UCC3817 |
Artikelnummer | UCC3817DWG4 |
BiCMOS Power Factor Preregulator 16-SOIC 0 bis 70
Datenblätter
UCC2817, UCC2818, UCC3817 and UCC3818 BiCMOS Power Factor Pregulator datasheet
PDF, 1.4 Mb, Revision: K, Datei veröffentlicht: Oct 1, 2016
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 16 |
Package Type | DW |
Industry STD Term | SOIC |
JEDEC Code | R-PDSO-G |
Package QTY | 40 |
Carrier | TUBE |
Device Marking | UCC3817DW |
Width (mm) | 7.5 |
Length (mm) | 10.3 |
Thickness (mm) | 2.35 |
Pitch (mm) | 1.27 |
Max Height (mm) | 2.65 |
Mechanical Data | Herunterladen |
Parameter
Control Method | CCM |
Device Type | Single-phase PFC |
Operating Supply Current | 4 mA |
Operating Supply(Max) | 18 V |
Operating Temperature Range | 0 to 70 C |
Package Group | SOIC |
Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
Peak Output Sink Current Gate Drive | 1.2 A |
Peak Output Source Current Gate Drive | -1.2 A |
Practical Operating Frequency(Max) | 0.25 MHz |
Rating | Catalog |
Special Features | < 150W Applications,> 750W Applications,Average Current Mode,Enable,OVP |
Startup Current | 0.15 mA |
UVLO Thresholds On/Off | 16/10 V |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: UCC3817EVM
UCC3817EVM BiCMOS Power Factor Preregulator EVM
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- PFC Family Differences UCC3817A/18A/19A and UCC3817/18/19PDF, 32 Kb, Datei veröffentlicht: Aug 18, 2003
The UCC3817A/18A/19A family of PFC controllers (UCC3817A family) is pin for pin compatible with the UCC3817/18/19 family of devices (UCC3817 family). The output stage of UCC3817A family has been updated to allow use of a smaller external gate drive resistor values. For some power supply designs where an adequately high enough gate drive resistor can not be used, the UCC3817A family offers a more r - UCC3817 Current Sense Transformer EvaluationPDF, 49 Kb, Datei veröffentlicht: Feb 13, 2004
- Synchronizing a PFC Controller from a Down Stream Controller Gate DrivePDF, 103 Kb, Datei veröffentlicht: Nov 3, 2000
Due to pending line harmonic requirements at higher power levels, power factor correction (PFC) is required in some ac-to-dc off-line power converter applications. This type of power converter can be designed with two cascaded power stages similar to the configuration in Figure 1. The first stage is a boost converter that converts the ac voltage to dc voltage with PFC. The output voltage of the bo - AC Requirements for Power Factor Correction CircuitsPDF, 29 Kb, Datei veröffentlicht: Mar 28, 2002
This technical brief identifies the recommended range of IAC for each of the devices within the UCC3854 family of PFC controllers. - Startup Current transient of the Leading Edge Triggered PFC ControllersPDF, 43 Kb, Datei veröffentlicht: Jun 30, 2004
- Avoiding Audible Noise at Light Loads When Using Leading Edge Triggered PFC Con (Rev. C)PDF, 57 Kb, Revision: C, Datei veröffentlicht: Apr 13, 2011
This application note applies to the TI average current mode, leading edge modulation PFC controllers. See Applicable Device Table for part numbers. - DN-66 UC3854A/B and UC3855A/B Provide Power Limiting with Sinusoidal Input (Rev. A)PDF, 80 Kb, Revision: A, Datei veröffentlicht: Nov 6, 2001
- Accurate PWM Duty Cycle ClampPDF, 58 Kb, Datei veröffentlicht: Jan 25, 2002
Power supply applications using current sense transformers require a duty cycle clamp on the pulse width modulator (PWM) to ensure transformer reset. Not all PWMs come with a duty cycle clamp presenting a problem for the power supply designer. This application note shows how to implement a duty cycle clamp by using a simple delay circuit.
Modellreihe
Serie: UCC3817 (9)
Herstellerklassifikation
- Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction