Datasheet Texas Instruments TPS61141DRCR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS61141 |
| Artikelnummer | TPS61141DRCR |
Dual, 2x 27V, 700mA Schalter, 1,2MHz Boost Converter mit weißer LED mit einem Induktor und OLED-Treiber 10-VSON -40 bis 85
Datenblätter
Dual Output Boost Regulator Using SIngle Inductor datasheet
PDF, 1.2 Mb, Revision: B, Datei veröffentlicht: Mar 22, 2007
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 10 |
| Package Type | DRC |
| Industry STD Term | VSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | BRG |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Herunterladen |
Parameter
| Number of Channels | 2 |
| Duty Cycle(Max) | 93 % |
| LED | 1 OLED + 4 |
| LED Current Per Channel | 23 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VSON |
| Package Size: mm2:W x L | 10VSON: 9 mm2: 3 x 3(VSON) PKG |
| Peak Efficiency | 85 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1.5 uA |
| Special Features | Synchronous Rectification |
| Switching Frequency(Max) | 1200 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 6 V |
| Vin(Min) | 3 V |
| Vout(Max) | 27 V |
| Vout(Min) | 2.5 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS61140EVM-157
TPS61140EVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Clamshell Phone w/OLED/LCD Screen Using the TPS61140 Dial Output Boost RegulatorPDF, 49 Kb, Datei veröffentlicht: Jul 6, 2006
The TPS61140/1 is a dual output boost converter providing regulated voltage and current output with one boost converter. The reference design and application example shown in this document can be used to power a clamshell phone with an organic light-emitting diode (OLED) and a LCD screen. This device is ideal for driving the OLED sub display and WLED backlight for the LCD main display in clamshell - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, Datei veröffentlicht: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, Revision: A, Datei veröffentlicht: May 11, 2015
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, Datei veröffentlicht: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Modellreihe
Serie: TPS61141 (2)
- TPS61141DRCR TPS61141DRCRG4
Herstellerklassifikation
- Semiconductors > Power Management > LED Driver > Backlight LED Driver