Datasheet Texas Instruments OPA4684IDR — Datenblatt

HerstellerTexas Instruments
SerieOPA4684
ArtikelnummerOPA4684IDR
Datasheet Texas Instruments OPA4684IDR

Quad-Operationsverstärker mit geringem Stromverbrauch und Stromrückführung 14-SOIC -40 bis 85

Datenblätter

Quad, Low-Power, Current-Feedback Operational Amplifier datasheet
PDF, 1.1 Mb, Revision: G, Datei veröffentlicht: Jul 2, 2008
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin14
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device MarkingOPA4684
Width (mm)3.91
Length (mm)8.65
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataHerunterladen

Parameter

2nd Harmonic67 dBc
3rd Harmonic70 dBc
@ MHz5
Acl, min spec gain1 V/V
Additional FeaturesShutdown
ArchitectureBipolar,Current FB
BW @ Acl210 MHz
CMRR(Min)53 dB
CMRR(Typ)60 dB
GBW(Typ)210 MHz
Input Bias Current(Max)10000000 pA
Iq per channel(Max)1.8 mA
Iq per channel(Typ)1.7 mA
Number of Channels4
Offset Drift(Typ)12 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)120 mA
Package GroupSOIC
Package Size: mm2:W x L14SOIC: 52 mm2: 6 x 8.65(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)820 V/us
Total Supply Voltage(Max)12 +5V=5, +/-5V=10
Total Supply Voltage(Min)5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)3.7 nV/rtHz
Vn at Flatband(Typ)3.7 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)3.5 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: DEM-OPA468XD
    DEM-OPA468xD: Demonstration Board
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA468XPW
    DEM-OPA468xPW: Demonstration board
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA-SO-4A
    DEM-OPA-SO-4A
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA-TSSOP-4A
    DEM-OPA-TSSOP-4A
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Current Feedback Amplifiers: Review, Stability Analysis, and Applications
    PDF, 53 Kb, Datei veröffentlicht: Nov 20, 2000
    The majority of op amp circuits are closed-loop feedback systems that implement classical control theory analysis. Analog designers are comfortable with Voltage FeedBack (VFB) op amps in a closed-loop system and are familiar with the ideal op amp approximations feedback permit. This application bulletin will demonstrate how CFB op amps can be analyzed in a similar fashion. Once the closed-loop sim
  • Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance
    PDF, 280 Kb, Datei veröffentlicht: Apr 28, 2004
    Optimizing a circuit design with a current-feedback (CFB) op amp is a relatively straightforward task, once one understands how CFB op amps achieve stability. This application note explains a 2nd-order CFB model so that any designer can better understand the flexibility of the CFB op amp. This report also discusses stability analysis, the effects of parasitic components due to PCBs, optimization
  • Active filters using current-feedback amplifiers
    PDF, 227 Kb, Datei veröffentlicht: Feb 25, 2005
  • Expanding the usability of current-feedback amplifiers
    PDF, 215 Kb, Datei veröffentlicht: Feb 28, 2005
  • RLC Filter Design for ADC Interface Applications (Rev. A)
    PDF, 299 Kb, Revision: A, Datei veröffentlicht: May 13, 2015
    As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
  • ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
    PDF, 273 Kb, Datei veröffentlicht: Apr 22, 2004
    Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
  • Measuring Board Parasitics in High-Speed Analog Design
    PDF, 134 Kb, Datei veröffentlicht: Jul 7, 2003
    Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)