Datasheet Texas Instruments LM5160QPWPTQ1 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM5160-Q1 |
| Artikelnummer | LM5160QPWPTQ1 |
Breiter Eingang 65 V, 1,5 A Synchron-Buck / Fly-Buck ™ -Konverter 14-HTSSOP -40 bis 125
Datenblätter
LM5160-Q1 Wide Input 65-V, 1.5-A Synchronous Buck / Fly-Buck Converter datasheet
PDF, 1.8 Mb, Revision: A, Datei veröffentlicht: Nov 10, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 | 14 |
| Package Type | PWP | PWP |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | 5160 | QPWPQ1 |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Control Mode | Constant on-time (COT) |
| Duty Cycle(Max) | 92 % |
| Iout(Max) | 1.5 A |
| Iq(Typ) | 2.3 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Rating | Automotive |
| Regulated Outputs | 1 |
| Special Features | Enable,Light Load Efficiency,Pre-Bias Start-Up,Synchronous Rectification,UVLO Adjustable |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 50 kHz |
| Type | Converter |
| Vin(Max) | 65 V |
| Vin(Min) | 4.5 V |
| Vout(Max) | 60 V |
| Vout(Min) | 2 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LM5160DNTFBKEVM
LM5160DNTFBKEVM Fly-Buck Isolated Bias Supply Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM5160DNTBKEVM
LM5160DNTBKEVM Wide Input 65V, 1.5A Synchronous Step-Down DC-DC Converter
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Is Your IGBT Gate-Driver Power Supply OptimizedPDF, 115 Kb, Datei veröffentlicht: Mar 12, 2015
Insulated Gate Bipolar Transistors (IGBTs) are used in high current three-phase AC motors. This application report discusses the theory and requirements of gate-drive power supply for IGBTs. It also discusses the isolation requirements and calculation of correct amount of IGBT drive power. - AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C)PDF, 870 Kb, Revision: C, Datei veröffentlicht: Dec 17, 2014
In many applications, one or more low-cost, simple to use, isolated power supplies working from input voltages up to 100 V are needed. Traditional solutions use flyback converters to generate this bias supply. Flyback designs typically utilize asymmetric transformers turns ratios for primary and secondary power windings, with an optocoupler and reference, or an auxiliary winding for feedback regul - Fly-Buck(TM) converter provides EMC and isolation in PLC applicationsPDF, 201 Kb, Datei veröffentlicht: Jan 29, 2015
Modellreihe
Serie: LM5160-Q1 (3)
- LM5160QPWPQ1 LM5160QPWPRQ1 LM5160QPWPTQ1
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)