Datasheet Texas Instruments DAC8541Y/2K — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DAC8541 |
| Artikelnummer | DAC8541Y/2K |
Niedriger Stromverbrauch, 16-Bit-D / A-Wandler mit 1,8 V kompatibler paralleler ZF, Rail-to-Rail-Spannungsausgang 32-TQFP -40 bis 85
Datenblätter
16-Bit, Single Channel, Parallel Input Digital-to-Analog Converter with Rail-to- datasheet
PDF, 1.1 Mb, Datei veröffentlicht: Dec 5, 2001
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 32 |
| Package Type | PBS |
| Industry STD Term | TQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | 8541Y |
| Width (mm) | 5 |
| Length (mm) | 5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Code to Code Glitch(Typ) | 20 nV-sec |
| DAC Architecture | String |
| DAC Channels | 1 |
| Gain Error(Max) | 0.8 %FSR |
| INL(Max) | 65 +/-LSB |
| Interface | Parallel |
| Offset Error(Max) | N/A % |
| Operating Temperature Range | -40 to 85 C |
| Output Range Max. | 5.5 mA/V |
| Output Type | Buffered Voltage |
| Package Group | TQFP |
| Package Size: mm2:W x L | 32TQFP: 49 mm2: 7 x 7(TQFP) PKG |
| Power Consumption(Typ) | 0.72 mW |
| Rating | Catalog |
| Reference: Type | Ext |
| Resolution | 16 Bits |
| Sample / Update Rate | 0.1 MSPS |
| Settling Time | 10 µs |
| Special Features | Reset to Mid-Scale |
| Zero Code Error(Typ) | 0.8 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DAC8541EVM
DAC8541 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Interfacing with the DAC8541 Digital-to-Analog ConverterPDF, 666 Kb, Datei veröffentlicht: Jun 13, 2002
This application report shows how to interface and operate the DAC8541 with a commercially available microprocessor or Texas Instruments DSP. Although this report uses a DSP as an example for the host interface, the concept is generic in nature and therefore should fit any host processor selected to interface with this DAC. This report bridges the gap between digital signal system processing and a - Implementing a 4 mA to 20 mA Current Loop on TI DSPsPDF, 204 Kb, Datei veröffentlicht: Jan 5, 2004
Use of 4-mA to 20-mA (4-20 mA) current loops has become the standard in the process-control industry due to their increased resistance to noise compared to voltage-modulated signals. TI digital signal processors (DSPs) increasingly are becoming the standard for microcontrollers in a control application. Therefore, an opportunity exists to connect the many sensors and electromechanical devices on t
Modellreihe
Serie: DAC8541 (3)
- DAC8541Y/250 DAC8541Y/250G4 DAC8541Y/2K
Herstellerklassifikation
- Semiconductors > Data Converters > Digital-to-Analog Converters (DACs) > Precision DACs (=<10MSPS)