Datasheet Texas Instruments SN74CBTLV1G125DBVR — Datenblatt

SN74CBTLV1G125
LOW-VOLTAGE SINGLE FET BUS SWITCH
www.ti.com SCDS057H – MARCH 1998 – REVISED JUNE 2006 FEATURES 5-Ω Switch Connection Between Two Ports
Rail-to-Rail Switching on Data I/O Ports Ioff Supports Partial-Power-Down Mode
Operation DBV PACKAGE
(TOP VIEW) OE 1 A 2 GND 3 DCK PACKAGE
(TOP VIEW) OE 1 A 2 GND 3 VCC 5 5 VCC 4 B B 4 See mechanical drawings for dimensions. DESCRIPTION/ORDERING INFORMATION
The SN74CBTLV1G125 features a single high-speed line switch. The switch is disabled when the output-enable
(OE) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging
current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2) PACKAGE (1) TOP-SIDE MARKING (2) ORDERABLE PART NUMBER SOT (SOT-23) – DBV Reel of 3000 SN74CBTLV1G125DBVR V25_ SOT (SC-70) – DCK Reel of 3000 SN74CBTLV1G125DCKR VM_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
The actual top-side marking has one additional character that designates the assembly/test site. FUNCTION TABLE
INPUT
OE FUNCTION L A port = B port H Disconnect LOGIC DIAGRAM (POSITIVE LOGIC)
2 …