Datasheet Texas Instruments TPS40192DRCR — Datenblatt

HerstellerTexas Instruments
SerieTPS40192
ArtikelnummerTPS40192DRCR
Datasheet Texas Instruments TPS40192DRCR

4,5 V bis 18 V Eingang, niedrige Pinanzahl, Synchron-Buck-Controller mit guter Leistung 10-VSON -40 bis 85

Datenblätter

TPS4019x 4.5-V to 18-V Input, 10-Pin, Synchronous Buck Controller With Power Good datasheet
PDF, 2.6 Mb, Revision: F, Datei veröffentlicht: Nov 11, 2016
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY3000
CarrierLARGE T&R
Device Marking0192
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataHerunterladen

Parameter

Duty Cycle(Max)85 %
Iout(Max)15 A
Iq(Typ)2.5 mA
Number of Phases1
Operating Temperature Range-40 to 85 C
Package GroupVSON
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Pre-Bias Start-Up,Synchronous Rectification
Switching Frequency(Max)600 kHz
Switching Frequency(Min)600 kHz
TypeController
Vin(Max)18 V
Vin(Min)4.5 V
Vout(Max)14.4 V
Vout(Min)0.591 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS40192EVM-001
    TPS40192 14V Input, 1.8V Output, 10A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS40192EVM-525
    10A, 12V Input, 1.8V Output Synchronous Buck Converter using the TPS40192 and NexFETВ™ MOSFETs
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS40193EVM-001
    TPS40193 12V Input, 1.8V Output, 10A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • TMS320C6472 5V Input Pwr Design, Integrated FET DC/DC Converters and Controllers
    PDF, 452 Kb, Datei veröffentlicht: Mar 26, 2010
    This reference design is intended for designers who wish to design up to eight TMS320C6472 Digital Signal Processors into a system using a nominal input voltage of 5 V, with a flexible design using external FETs, and low-dropout regulators for the low-power rails.
  • Enabling Multiple TPS4019x Devices
    PDF, 72 Kb, Datei veröffentlicht: Mar 29, 2012
  • Not All Jitter Is Created Equal (Rev. A)
    PDF, 555 Kb, Revision: A, Datei veröffentlicht: Jul 4, 2015
    This application report offers a tutorial discussion on jitter in switching DC-DC converters. Not all power supply designs are equally susceptible to jitter, nor are they equally affected by jitter. Modes of switching jitter are defined and explained for several popular control architectures, which are then analyzed for sources of jitter. An example contrasting the amount of jitter and effect on o
  • 'C6472 12Vin Flexible Pwr Design Using DCDC Controllers and LDOs (8x C6472)
    PDF, 441 Kb, Datei veröffentlicht: Mar 26, 2010
    This reference design is intended for designers who wish to design up to eight TMS320C6472 Digital Signal Processors into a system using a nominal input voltage of 12 V, external FETs for design flexibility, and low-dropout regulators for the low-power rails.
  • Power Reference Design for the 'C6472 12V DCDC Controllers and LDOs
    PDF, 245 Kb, Datei veröffentlicht: Mar 26, 2010
    This reference design is intended for designers who wish to design a TMS320C6472 Digital Signal Processor into a system using a nominal input voltage of 12 V external FETs for design flexibility and low-dropout regulators for the low-power rails.
  • 5Vin DM643x Power using DC/DC Controllers and LDO
    PDF, 741 Kb, Datei veröffentlicht: Oct 9, 2008
  • 5Vin C642x Power using DC/DC Controllers and LDO
    PDF, 741 Kb, Datei veröffentlicht: Oct 9, 2008

Modellreihe

Serie: TPS40192 (4)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)