Datasheet Texas Instruments TPS63030DSKR — Datenblatt

HerstellerTexas Instruments
SerieTPS63030
ArtikelnummerTPS63030DSKR
Datasheet Texas Instruments TPS63030DSKR

Hocheffizienter Buck-Boost-Wandler mit einer Induktivität und 1-A-Schaltern 10-SON -40 bis 85

Datenblätter

TPS6303x High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches datasheet
PDF, 1.6 Mb, Revision: C, Datei veröffentlicht: Oct 28, 2014
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin10
Package TypeDSK
Industry STD TermWSON
JEDEC CodeS-PDSO-N
Package QTY3000
CarrierLARGE T&R
Device MarkingCEE
Width (mm)2.5
Length (mm)2.5
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical DataHerunterladen

Parameter

Duty Cycle(Max)100 %
Iout(Max)0.5 A
Iq(Typ)0.025 mA
Operating Temperature Range-40 to 85 C
Package GroupSON
RatingCatalog
Special FeaturesEnable,Frequency Synchronization,Light Load Efficiency,Load Disconnect,Synchronous Rectification,UVLO Fixed
Switch Current Limit(Min)0.8 A
Switch Current Limit(Typ)1 A
Switching Frequency(Max)2600 kHz
Switching Frequency(Min)2200 kHz
TopologyBuck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)1.8 V
Vout(Max)5.5 V
Vout(Min)1.2 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS63030EVM-417
    TPS63030 5.5V Input, 3.3V Output, 0.5A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS63030EVM-658
    TPS63030 Single LED 500mA Driver 2V to 5V input voltage Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Different methods to drive LEDs using TPS63xxx buck-boost converters (Rev. B)
    PDF, 86 Kb, Revision: B, Datei veröffentlicht: Jan 12, 2012
  • Low-power TEC driver
    PDF, 75 Kb, Datei veröffentlicht: Nov 18, 2014
    TPS63020 Low Power TEC Driver
  • High Efficiency DCDC Converter Reference Design for Stellaris (Rev. A)
    PDF, 952 Kb, Revision: A, Datei veröffentlicht: Apr 7, 2010
  • Extending the Soft Start Time in the TPS63010 Buck-Boost Converter
    PDF, 262 Kb, Datei veröffentlicht: Dec 5, 2012
  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revision: B, Datei veröffentlicht: Jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, Datei veröffentlicht: Apr 26, 2012
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revision: B, Datei veröffentlicht: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Datei veröffentlicht: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
  • 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B)
    PDF, 961 Kb, Revision: B, Datei veröffentlicht: Jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 1.8 V to 5.5 V, and who must increase the application run time by making use of the complete battery voltage range while still maintaining high efficiency over the entire battery life.

Modellreihe

Serie: TPS63030 (4)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)