Datasheet Texas Instruments MSP430F67641IPZR — Datenblatt
Hersteller | Texas Instruments |
Serie | MSP430F67641 |
Artikelnummer | MSP430F67641IPZR |
MSP430F676x1 - Kostengünstige 3-Phasen-Messung SOC 100-LQFP -40 bis 85
Datenblätter
MSP430F676x1 Polyphase Metering SoCs datasheet
PDF, 1.7 Mb, Datei veröffentlicht: Jun 2, 2014
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 100 |
Package Type | PZ |
Industry STD Term | LQFP |
JEDEC Code | S-PQFP-G |
Package QTY | 1000 |
Carrier | LARGE T&R |
Device Marking | F67641 |
Width (mm) | 14 |
Length (mm) | 14 |
Thickness (mm) | 1.4 |
Pitch (mm) | .5 |
Max Height (mm) | 1.6 |
Mechanical Data | Herunterladen |
Parameter
ADC | ADC10 - 6ch,SigmaDelta24 - 3ch |
AES | N/A |
Active Power | 346.8 uA/MHz |
Additional Features | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA |
BSL | UART |
CPU | MSP430 |
DMA | 3 |
Featured | f6 |
Frequency | 25 MHz |
GPIO Pins | 72 |
I2C | 1 |
Max VCC | 3.6 |
Min VCC | 1.8 |
Multiplier | 32x32 |
Non-volatile Memory | 128 KB |
Operating Temperature Range | -40 to 85 C |
Package Group | LQFP |
Package Size: mm2:W x L | 80LQFP: 196 mm2: 14 x 14(LQFP) PKG |
RAM | 8 KB |
Rating | Catalog |
SPI | 4 |
Special I/O | N/A |
Standby Power | 2.9 LPM3-uA |
Timers - 16-bit | 4 |
UART | 3 |
Wakeup Time | 3 us |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: EVM430-F67641
Polyphase Electric Meter with MSP430F67641 SoC
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EVM430-F6779
EVM430-F6779 - 3 Phase Electronic Watt-Hour EVM for Metering
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: ENERGYTRACE
MSP EnergyTrace Technology
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Implementation of a Low-Cost Three-Phase Watt-Hour Meter Using the MSP430F67641 (Rev. C)PDF, 2.9 Mb, Revision: C, Datei veröffentlicht: Aug 5, 2015
This application report describes the implementation of a low-cost three-phase electronic electricity meter using the Texas Instruments MSP430F67641 metering processor. This application report includes the necessary information with regard to metrology software and hardware procedures for this single-chip implementation. - Designing With MSP430 and Segment LCDs (Rev. A)PDF, 2.1 Mb, Revision: A, Datei veröffentlicht: Jul 20, 2015
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, Revision: A, Datei veröffentlicht: Apr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
Modellreihe
Serie: MSP430F67641 (4)
- MSP430F67641IPN MSP430F67641IPNR MSP430F67641IPZ MSP430F67641IPZR
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430F5x/6x