Datasheet Texas Instruments TMS320C203PZ — Datenblatt

HerstellerTexas Instruments
SerieTMS320C203
ArtikelnummerTMS320C203PZ
Datasheet Texas Instruments TMS320C203PZ

Digitaler Signalprozessor 100-LQFP

Datenblätter

Digital Signal Processors datasheet
PDF, 1.2 Mb, Revision: B, Datei veröffentlicht: Aug 30, 1998
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusNRND (Not recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin100
Package TypePZ
Industry STD TermLQFP
JEDEC CodeS-PQFP-G
Package QTY90
CarrierJEDEC TRAY (5+1)
Device MarkingTMS320C203PZ
Width (mm)14
Length (mm)14
Thickness (mm)1.4
Pitch (mm).5
Max Height (mm)1.6
Mechanical DataHerunterladen

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Designing the TMS320C203 DSP Development Board for TMS320C203 Evaluation
    PDF, 479 Kb, Datei veröffentlicht: Jul 1, 1997
    This application brief describes the design of the TMS320C203 development board (DVB) from both the hardware and software approach. The DVB is a simple stand-alone application board used to evaluate the performance and characteristics of the TMS320C203 digital signal processor (DSP) hardware and software. The DVB contains the Texas Instruments (TI?) TMS320C203 DSP and provides full-speed ve
  • Implementing Circular Buffers With Bit-Reversed Addressing
    PDF, 84 Kb, Datei veröffentlicht: Jul 1, 1997
    Delay lines are used in many DSP applications. Delay lines provide a buffer of the last N samples of data for a filter or other algorithm. While delay lines can be implemented as linear or circular buffers, buffers of the circular variety are often preferred due to their relative simplicity.Texas Instruments' (TI) TMS320 family of DSPs can manipulate circular buffer pointers without penalty to
  • Interfacing the TLC5618A Digital-to-Analog Converter to the TMS320C203 DSP
    PDF, 107 Kb, Datei veröffentlicht: May 11, 1998
    This application report describes the hardware and software needed to interface the TLC5618A dual 12-bit digital-to-analog converter (DAC) to the TMS320C203 digital signal processor (DSP). The solution presented provides the bridge between the system digital signals and the analog signal processing. The software organization and flow chart are presented with the software listing.
  • Interfacing the TLC5510 Analog-to-Digital Converter to the TMS320C203 DSP
    PDF, 401 Kb, Datei veröffentlicht: Apr 27, 2000
    This application report is a summary of the application note titled Interfacing the TLC5510 Analog-to-Digital Converter to the TMS320C203 DSP (literature number SLAA029) that presents guidelines for interfacing the TI TLC5510 analog-to-digital converter (ADC) to the TI TMS320C203 DSP. The TLC5510 is a CMOS, 8-bit, 20 MSPS (megasamples per second) ADC utilizing a semi-flash architecture. The TLC551
  • Interfacing the TLC5510 Analog-to-Digital Converter to the TMS320C203 DSP
    PDF, 540 Kb, Datei veröffentlicht: Feb 1, 1998
    This application report presents guidelines for interfacing the Texas Instruments (TI(TM)) TLC5510 8-bit parallel-output analog-to-digital converter (ADC) to the TI TMS320C203 DSP data bus. The 8-bit ADC operates at a rate of 20 MHz. The C callable application program (assembly code) used to initialize the TMS320C203 and execute the code is also discussed.This report serves as reference inform
  • Interfacing the TLV1572 Analog-to-Digital Converter to the TMS320C203 DSP (Rev. B)
    PDF, 135 Kb, Revision: B, Datei veröffentlicht: May 11, 1999
    This application report presents a hardware solution for interfacing the TLV1572 10-bit, 1.25 MSPS (Mega Samples Per Second), successive low-power analog-to-digital converter (ADC) to the TMS320C203 16-bit fixed-point digital signal processor (DSP). In addition, a C-callable interface program is shown which supports the data transfer between ADC and DSP.
  • Interfacing the TLV1544 Analog-to-Digital Converter to the TMS320C203 DSP (Rev. A)
    PDF, 154 Kb, Revision: A, Datei veröffentlicht: Feb 15, 1999
    This application report presents two hardware solutions for interfacing the TLV1544 10-bit low-power analog-to-digital converter (ADC) to the TMS320C203 16-bit fixed-point digital signal processor (DSP). The report describes the interface hardware and shows a C-callable software routine which supports the data transfer. In addition, it provides useful hints on the design of a typical system power

Modellreihe

Herstellerklassifikation

  • Semiconductors > Processors > Other Processors