Datasheet Texas Instruments LMV841QMGX/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMV841-Q1 |
| Artikelnummer | LMV841QMGX/NOPB |
CMOS-Eingang, RRIO, Operationsverstärker mit großem Versorgungsbereich 5-SC70 -40 bis 125
Datenblätter
LMV84x CMOS Input, RRIO, Low Power, Wide Supply Range, 4.5-MHz Operational Amplifiers datasheet
PDF, 1.7 Mb, Revision: H, Datei veröffentlicht: Jul 29, 2016
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 5 |
| Package Type | DCK |
| Industry STD Term | SOT-SC70 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | ATA |
| Width (mm) | 1.25 |
| Length (mm) | 2 |
| Thickness (mm) | .9 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 86 dB |
| CMRR(Typ) | 112 dB |
| GBW(Typ) | 4.5 MHz |
| Input Bias Current(Max) | 10 pA |
| Iq per channel(Max) | 2 mA |
| Iq per channel(Typ) | 1.02 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.35 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 30 mA |
| Package Group | SC70 |
| Package Size: mm2:W x L | 5SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rail-to-Rail | In,Out |
| Rating | Automotive |
| Slew Rate(Typ) | 2.5 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 20 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: 551012922-001
SC-70 Amplifier Universal Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-1708 LMV841 Stability Considerations (Rev. A)PDF, 40 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
This application note provides information regarding LMV841 stability. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
Modellreihe
Serie: LMV841-Q1 (2)
- LMV841QMG/NOPB LMV841QMGX/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps