Datasheet Texas Instruments TPS60213DGS — Datenblatt

Geregelte 3,3-V-50-mA-Ladungspumpe mit geringer Welligkeit und extrem niedrigem Betriebsstrom 10-VSSOP -40 bis 85

Datenblätter

PDF, 1.0 Mb, Datei veröffentlicht: Jun 20, 2000

Auszug aus dem Dokument

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Iout(Max)	0.05 A
Iq(Typ)	0.002 mA
Operating Temperature Range	-40 to 85 C
Package Group	VSSOP
Rating	Catalog
Regulated Outputs	1
Special Features	Frequency Synchronization,Power Good
Switching Frequency(Max)	400 kHz
Switching Frequency(Min)	200 kHz
Type	Charge Pump
Vin(Max)	3.6 V
Vin(Min)	1.8 V
Vout(Max)	3.3 V
Vout(Min)	3.3 V

RoHS

Compliant

Evaluation Modules & Boards: TPS60210EVM-167
Evaluation module for 2 battery cells to 3.3V, 100mA ultra-low operating current charge pump
Lifecycle Status: Active (Recommended for new designs)
- Herunterladen

Herunterladen
Optimizing Resistor Dividers at a Comparator (Rev. A)
PDF, 120 Kb, Revision: A, Datei veröffentlicht: Jun 3, 2013
Herunterladen
Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
Herunterladen
Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
PDF, 130 Kb, Datei veröffentlicht: Sep 19, 2011
Herunterladen
Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Serie: TPS60213 (3)

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)