Datasheet Texas Instruments TMS320F28054MPNQ — Datenblatt

HerstellerTexas Instruments
SerieTMS320F28054M
ArtikelnummerTMS320F28054MPNQ
Datasheet Texas Instruments TMS320F28054MPNQ

Piccolo-Mikrocontroller mit InstaSPIN-MOTION 80-LQFP -40 bis 125

Datenblätter

TMS320F2805x Piccoloв„ў Microcontrollers datasheet
PDF, 1.6 Mb, Revision: B, Datei veröffentlicht: Jul 2, 2014
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin8080
Package TypePNPN
Industry STD TermLQFPLQFP
JEDEC CodeS-PQFP-GS-PQFP-G
Package QTY119119
CarrierJEDEC TRAY (5+1)JEDEC TRAY (5+1)
Device MarkingF28054MPNQTMS320
Width (mm)1212
Length (mm)1212
Thickness (mm)1.41.4
Pitch (mm).5.5
Max Height (mm)1.61.6
Mechanical DataHerunterladenHerunterladen

Parameter

ADC16 Ch
ADC Resolution12-bit
CAN1
CPUC28x
Comparators7
FPUNo
Flash128 KB
Frequency60 MHz
I2C1
Operating Temperature Range-40 to 105,-40 to 125 C
PGA/VGA4
PWM14 Ch
Pin/Package80LQFP
QEP1
RAM16 KB
SPI1
Total Processing60 MIPS
UART3 SCI

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
    XDS100v2 JTAG Debug Probe (20-pin cTI version)
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TMDSCNCD28054MISO
    controlCARD with Piccolo TMS320F28054MPNT, InstaSPIN-FOC and InstaSPIN-MOTION enabled
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TMDSHVMTRINSPIN
    High Voltage Motor Control Kit with InstaSPIN-FOC and InstaSPIN-MOTION enabled Piccolo MCU
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DRV8301-69M-KIT
    Three Phase BLDC & PMSM Motor Kit with DRV8301 and InstaSPIN-enabled Piccolo TMS320F28069M MCU
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DRV8312-69M-KIT
    Three Phase BLDC Motor Kit with DRV8312 and InstaSPIN-Enabled Piccolo TMS320F28069M MCU
    Lifecycle Status: Active (Recommended for new designs)
  • Development Kits: INSTASPINUNIVERSALGUI
    GUI Composer Runtime Installation and Webapp for MotorWare Universal GUI
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: C2000-GANG
    C2000 Gang Programmer
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
    XDS100v2 JTAG Debug Probe (14-pin TI version)
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
    XDS560v2 System Trace USB & Ethernet Debug Probe
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
    XDS560v2 System Trace USB Debug Probe
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Piccolo MCU CAN Module Operation Using the On-Chip Zero-Pin Oscillator (Rev. A)
    PDF, 43 Kb, Revision: A, Datei veröffentlicht: Aug 19, 2011
    CAN protocol imposes rather stringent requirements on its timing source, which are generally met by the provision of an external quartz crystal/oscillator. The TMS320C2803x/TMS320F2806x series of microcontrollers have an on-chip zero-pin oscillator that needs no external components. This application report describes how to use the CAN module with this oscillator to operate at the maximum bit rate
  • Using the CAN Piccolo Bootloader at High Temperature
    PDF, 33 Kb, Datei veröffentlicht: Jun 29, 2015
    The Controller Area Network (CAN) protocol requires strict tolerances from reference bit clocks, which are generally met using quartz crystal oscillators or ceramic resonators. The TMS320F2803x, TMS320F2805x, and TMS320F2806x microcontrollers use an on-chip zero-pin oscillator with no external components as a reference clock for the CAN bootloader. This oscillator's tolerance is sufficient at room
  • InstaSPIN(tm) BLDC Lab
    PDF, 1.4 Mb, Datei veröffentlicht: Nov 15, 2011
    For this lab we are using the Three Phase BLDC Motor Kit with DRV8312 and Piccolo MCU (DRV8312-C2-KIT) (the DRV8302-HC-C2-KIT or DRV8301-HC-C2-KIT can also be used) with a Piccolo F28035 controlCARD subsystem to run the sensorless InstaSPIN BLDC technique.These are the tasks that must be done to spin motors:Make sure all physical connections and jumper settings on the kit
  • Accelerators: Enhancing the Capabilities of the C2000 MCU Family Technical Brief (Rev. A)
    PDF, 155 Kb, Revision: A, Datei veröffentlicht: Nov 8, 2016
    Engineers designing real-time control systems are constantly faced with the challenge of optimizing performance. These systems require minimal processing latency in order to meet the control loop performance specifications. At the heart of the control systems are math intensive algorithms which are used to calculate the control signals. Utilizing a microcontroller (MCU) that can quickly and effici
  • Serial Flash Programming of C2000 Microcontrollers (Rev. B)
    PDF, 387 Kb, Revision: B, Datei veröffentlicht: Feb 8, 2017
    Often times, embedded processors must be programmed in situations where JTAG is not a viable optionfor programming the target device. When this is the case, the engineer must rely on some type of serial programming solution. C2000 devices aid in this endeavor through their inclusion of several program loading utilities included in ROM. These utilities are useful, but only solve half of the progr
  • EEPROM Emulation With the TMS320F28xxx DSCs
    PDF, 407 Kb, Datei veröffentlicht: Sep 21, 2009
    Many applications require storing small quantities of system related data (e.g., calibration values, device configuration) in a non-volatile memory, so that it can be used or modified and reused even after power cycling the system. EEPROMs are primarily used for this purpose. EEPROMs have the ability to erase and write individual bytes of memory many times over and the programmed locations retain
  • Calculator for CAN Bit Timing Parameters
    PDF, 37 Kb, Datei veröffentlicht: Mar 22, 2016
    Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat
  • Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
    PDF, 2.0 Mb, Datei veröffentlicht: Nov 16, 2009
    The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
  • TPS75005 Quick-Start Guide with C2000 Controllers
    PDF, 129 Kb, Datei veröffentlicht: Jan 17, 2012
    The TPS75005 is a complete power management solution for C2000 controllers from Texas Instruments. This document illustrates how to attach the TPS75005 to a C2000 controller.

Modellreihe

Serie: TMS320F28054M (2)

Herstellerklassifikation

  • Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Piccolo F2802x/3x/5x/6x/7x