Datasheet Texas Instruments 74ACT16240DLR — Datenblatt

HerstellerTexas Instruments
Serie74ACT16240
Artikelnummer74ACT16240DLR
Datasheet Texas Instruments 74ACT16240DLR

16-Bit-Puffer / Treiber mit 3-Zustands-Ausgängen 48-SSOP -40 bis 85

Datenblätter

16-Bit Buffers/Drivers With 3-State Outputs datasheet
PDF, 506 Kb, Revision: C, Datei veröffentlicht: Nov 1, 1996
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin48
Package TypeDL
Industry STD TermSSOP
JEDEC CodeR-PDSO-G
Package QTY1000
CarrierLARGE T&R
Device MarkingACT16240
Width (mm)7.49
Length (mm)15.88
Thickness (mm)2.59
Pitch (mm).635
Max Height (mm)2.79
Mechanical DataHerunterladen

Parameter

Bits16
F @ Nom Voltage(Max)90 Mhz
ICC @ Nom Voltage(Max)0.08 mA
Operating Temperature Range-40 to 85 C
Output Drive (IOL/IOH)(Max)-24/24 mA
Package GroupSSOP
Package Size: mm2:W x L48SSOP: 164 mm2: 10.35 x 15.88(SSOP) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyACT
VCC(Max)5.5 V
VCC(Min)4.5 V
Voltage(Nom)5 V
tpd @ Nom Voltage(Max)8.5 ns

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Selecting the Right Level Translation Solution (Rev. A)
    PDF, 313 Kb, Revision: A, Datei veröffentlicht: Jun 22, 2004
    Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
  • TI IBIS File Creation Validation and Distribution Processes
    PDF, 380 Kb, Datei veröffentlicht: Aug 29, 2002
    The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
  • Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
    PDF, 614 Kb, Revision: C, Datei veröffentlicht: Dec 2, 2015
  • Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
    PDF, 337 Kb, Datei veröffentlicht: Jul 8, 2004
    Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
  • Introduction to Logic
    PDF, 93 Kb, Datei veröffentlicht: Apr 30, 2015
  • Implications of Slow or Floating CMOS Inputs (Rev. D)
    PDF, 260 Kb, Revision: D, Datei veröffentlicht: Jun 23, 2016
  • CMOS Power Consumption and CPD Calculation (Rev. B)
    PDF, 89 Kb, Revision: B, Datei veröffentlicht: Jun 1, 1997
    Reduction of power consumption makes a device more reliable. The need for devices that consume a minimum amount of power was a major driving force behind the development of CMOS technologies. As a result CMOS devices are best known for low power consumption. However for minimizing the power requirements of a board or a system simply knowing that CMOS devices may use less power than equivale
  • Designing With Logic (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
    Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
  • Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc
    PDF, 43 Kb, Datei veröffentlicht: Apr 1, 1996
    Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren

Modellreihe

Serie: 74ACT16240 (3)

Herstellerklassifikation

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Inverting Buffer/Driver