Datasheet Texas Instruments LM318M — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM318-N |
| Artikelnummer | LM318M |
Operationsverstärker 8-SOIC 0 bis 70
Datenblätter
LM118/LM218/LM318 Operational Amplifiers datasheet
PDF, 1.6 Mb, Revision: C, Datei veröffentlicht: Mar 20, 2013
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 95 | 95 |
| Carrier | TUBE | TUBE |
| Device Marking | 318M | LM |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Herunterladen | Herunterladen |
Ersatz
| Replacement | LM318M/NOPB |
| Replacement Code | S |
Parameter
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 70 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 15 MHz |
| Input Bias Current(Max) | 500000 pA |
| Iq per channel(Max) | 10 mA |
| Iq per channel(Typ) | 4.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 6 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 20 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 70 V/us |
| Total Supply Voltage(Max) | 40 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 15 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 10 mV |
Öko-Plan
| RoHS | See ti.com |
Anwendungshinweise
- Instrumentational Amplifiers (See also LMP8358)PDF, 76 Kb, Datei veröffentlicht: Oct 2, 2002
- AN-446 A 150W IC Op Amp Simplifies Design of Power CircuitsPDF, 782 Kb, Datei veröffentlicht: May 10, 2004
Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits - Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Sep 19, 2016
It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate. - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Modellreihe
Serie: LM318-N (4)
- LM318M LM318M/NOPB LM318MX/NOPB LM318N/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps