Datasheet Texas Instruments TS12A12511DCNR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TS12A12511 |
| Artikelnummer | TS12A12511DCNR |
5-Ohm-Einkanal-SPDT-Schalter mit negativer Signalisierungsfähigkeit 8-SOT-23 -40 bis 85
Datenblätter
TS12A12511 5-Ω Single-Channel SPDT Analog Switch With Negative Signaling Capability datasheet
PDF, 1.2 Mb, Revision: C, Datei veröffentlicht: Jan 14, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 | 8 |
| Package Type | DCN | DCN |
| Industry STD Term | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | HFHA | NFHS |
| Width (mm) | 1.63 | 1.63 |
| Length (mm) | 2.9 | 2.9 |
| Thickness (mm) | 1.1 | 1.1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.45 | 1.45 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Bandwidth | 152 MHz |
| Bandwidth(Max) | 93 MHz |
| Configuration | 2:1 SPDT |
| ESD Charged Device Model | 1 kV |
| ESD HBM | 2 kV |
| Input/Ouput Voltage(Max) | 12 V |
| Input/Ouput Voltage(Min) | -6 V |
| Input/Output Continuous Current(Max) | 50 mA |
| Input/Output OFF-state Capacitance(Typ) | 15 pF |
| Input/Output ON-state Capacitance(Typ) | 55 pF |
| Number of Channels | 1 |
| OFF-state leakage current(Max) | 0.05 µA |
| ON-state leakage current(Max) | 0.05 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 8SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rating | Catalog |
| Ron(Max) | 12.5 Ohms |
| Ron(Typ) | 5 Ohms |
| Supply Current(Max) | 0.2 uA |
| Supply Current(Typ) | 0.05 uA |
| Supply Range | 12 Max |
| VIH(Min) | 2.4 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 12 V |
| Vss(Min) | -6 V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, Datei veröffentlicht: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Modellreihe
Serie: TS12A12511 (3)
- TS12A12511DCNR TS12A12511DGKR TS12A12511DRJR
Herstellerklassifikation
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes