Datasheet Texas Instruments LF356MX/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LF356 |
| Artikelnummer | LF356MX/NOPB |
Operationsverstärker mit JFET-Eingang 8-SOIC 0 bis 70
Datenblätter
Datasheet LF155, LF156, LF256, LF257 LF355, LF356, LF357
PDF, 2.7 Mb, Sprache: en, Datei hochgeladen: Feb 10, 2023, Seiten: 46
LFx5x J FET Input Operational Amplifiers
LFx5x J FET Input Operational Amplifiers
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | M | LF356 |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | FET |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 5 MHz |
| Input Bias Current(Max) | 8000 pA |
| Iq per channel(Max) | 7 mA |
| Iq per channel(Typ) | 5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 3 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 25 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V+ |
| Rating | Catalog |
| Slew Rate(Typ) | 12 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 12 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- AN-447 Protection Schemes for BI-FET Amplifiers and SwitchesPDF, 80 Kb, Datei veröffentlicht: May 2, 2004
Application Note 447 Protection Schemes for BI-FET Amplifiers and Switches - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits. - AN-293 Control Applications of CMOS DACsPDF, 424 Kb, Datei veröffentlicht: May 10, 2004
Application Note 293 Control Applications of CMOS DACs - AN-253 LH0024 and LH0032 High Speed Op Amp ApplicationsPDF, 500 Kb, Datei veröffentlicht: May 2, 2004
Application Note 253 LH0024 and LH0032 High Speed Op Amp Applications - AN-275 CMOS D/A Converters Match Most MicroprocessorsPDF, 167 Kb, Datei veröffentlicht: May 2, 2004
Application Note 275 CMOS D/A Converters Match Most Microprocessors - AN-263 Sine Wave Generation Techniques (Rev. C)PDF, 747 Kb, Revision: C, Datei veröffentlicht: Apr 22, 2013
This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels. - AN-272 Op Amp Booster Designs (Rev. B)PDF, 959 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This application report describes the output booster or post amplifier designs required to achieveneeded voltage or current gain in applications that require substantially greater output voltage swing orcurrent (or both) than IC amplifiers can deliver. - Data Acq Using ADC0816 & ADC0817 8-Bit ADC w/On-Chip 16 Chan MultiplexrPDF, 722 Kb, Datei veröffentlicht: May 10, 2004
Application Note 258 Data Acquisition Using the ADC0816 and ADC0817 8-Bit A/D Convert er with On-Chip 16 Channel Multiplexer - AN-480 A 40 MHz Programmable Video Op AmpPDF, 218 Kb, Datei veröffentlicht: May 11, 2004
- AN-311 Theory and Applications of Logarithmic Amplifiers (Rev. B)PDF, 517 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
A number of instrumentation applications can benefit from the use of logarithmic or exponential signalprocessing techniques. The design and use of logarithmic/exponential circuits are often associated withinvolved temperature compensation requirements and difficult to stabilize feedback loops. For theseconsiderations and others, designers tend to avoid these circuits. Hybrid and modularlog - Get Fast Stable Response From Improved Unity-Gain FollowersPDF, 107 Kb, Datei veröffentlicht: Oct 2, 2002
- Applications of the LM3524 Pulse Width Modulator (Rev. B)PDF, 549 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
The LM3524 regulating pulse-width-modulator (PWM) is commonly used as the control element inswitching regulator power supplies. This is in keeping with its intended purpose. Engineers closelyassociate this part with switching power supplies. Nevertheless, the flexible combination of elements (seebox) within the LM3524 also allows it to be used in a number of other applications outside the po
Modellreihe
Serie: LF356 (5)
- LF356M LF356M/NOPB LF356MX LF356MX/NOPB LF356N/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps