Datasheet Texas Instruments LM3414HVSDX/NOPB — Datenblatt
Hersteller | Texas Instruments |
Serie | LM3414HV |
Artikelnummer | LM3414HVSDX/NOPB |
60 W Common Anode-fähiger Konstantstrom-Buck-LED-Treiber erfordert keine ext.
Datenblätter
LM3414/HV 1-A, 60-W Common Anode-Capable Constant Current Buck LED Driver Requires No External Current Sensing Resistor datasheet
PDF, 1.7 Mb, Revision: F, Datei veröffentlicht: Dec 3, 2015
Auszug aus dem Dokument
Preise
Detaillierte Beschreibung
Stromerfassung Res 8-WSON -40 bis 125
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 8 |
Package Type | NGQ |
Industry STD Term | WSON |
JEDEC Code | S-PDSO-N |
Package QTY | 4500 |
Carrier | LARGE T&R |
Device Marking | L249B |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .8 |
Pitch (mm) | .5 |
Max Height (mm) | .8 |
Mechanical Data | Herunterladen |
Parameter
Dimming Method | Analog,PWM |
Input Voltage | DC/DC Type |
Iout(Max) | 1 A |
Iq(Typ) | 3.3 mA |
Operating Temperature Range | -40 to 125 C |
Package Group | WSON |
Package Size: mm2:W x L | See datasheet (WSON) PKG |
Power Factor Correction | N/A Min |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Thermal Shutdown |
Switching Frequency(Max) | 1000 kHz |
Switching Frequency(Min) | 250 kHz |
Topology | Buck |
Type | Converter,Inductive |
Vin(Max) | 65 V |
Vin(Min) | 4.5 V |
Vout(Max) | 65 V |
Vout(Min) | 0.2 V |
Vref | 0.2 V |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LM3414HVSDEVAL
LM3414 LM3414HV 1A 65V LED Driver LLP-8 Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3414HVMREVAL
LM3414 LM3414HV 1A 65V LED Driver PSOP-8 Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, Revision: A, Datei veröffentlicht: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
Modellreihe
Serie: LM3414HV (4)
- LM3414HVMR/NOPB LM3414HVMRX/NOPB LM3414HVSD/NOPB LM3414HVSDX/NOPB
Herstellerklassifikation
- Semiconductors > Power Management > LED Driver > Illumination & General Lighting LED Driver