Datasheet Texas Instruments TPS54310PWPRG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS54310 |
| Artikelnummer | TPS54310PWPRG4 |
3V bis 6V Eingang, 3A Synchron-Abwärtswandler 20-HTSSOP -40 bis 125
Datenblätter
3-V to 6-V Input, 3-A Output Synchronous-Buck PWM Switcher With Integrated FETs (SWIFTв„ў) datasheet
PDF, 1.3 Mb, Revision: E, Datei veröffentlicht: Dec 19, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 20 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | TPS54310 |
| Width (mm) | 4.4 |
| Length (mm) | 6.5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Control Mode | Voltage Mode |
| Duty Cycle(Max) | 87 % |
| Iout(Max) | 3 A |
| Iq(Typ) | 6.2 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization,Power Good,Synchronous Rectification |
| Switching Frequency(Max) | 700 kHz |
| Switching Frequency(Min) | 280 kHz |
| Type | Converter |
| Vin(Max) | 6 V |
| Vin(Min) | 3 V |
| Vout(Max) | 3.3 V |
| Vout(Min) | 0.9 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS54310EVM
3-A, 3-6 Vin DC/DC Converter with Adjustable Output Down to 0.9V
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Designing with the TPS54310 Synchronous Buck RegulatorPDF, 130 Kb, Datei veröffentlicht: Dec 7, 2001
The SWIFT TPS54310 externally compensated synchronous buck regulator makes designing a power solution quick and easy. The SWIFT Designer software tool is a resource that can greatly reduce design time by providing a complete power supply solution with only a few clicks of a mouse. The design methods presented in this application note are similar to the design methods used by the SWIFT Designe - Power for V5’s Transceiver using DC/DC Converters with Integrated FETsPDF, 89 Kb, Datei veröffentlicht: Sep 4, 2007
This power supply was designed to power the transceivers in the Xilinxв„ў Virtexв„ў-5 LXT and FXT platforms. - Using 3.3-V Signals for Spartan-3 Configuration and JTAG Ports (Rev. A)PDF, 38 Kb, Revision: A, Datei veröffentlicht: Apr 13, 2004
- Dual Output Power Supply Sequencing for High Performance ProcessorsPDF, 6.0 Mb, Datei veröffentlicht: Jul 17, 2002
Dual voltage power supply architectures are becoming commonplace in high performance microprocessor and digital signal processor (DSP) systems. To save power and increase processing speeds, processor cores have smaller geometry cells and require lower supply voltages than the system bus voltages. Power management in these systems requires special attention. Yesterday's power management ICs and app - Powering today’s multi-rail FPGAs and DSPs, Part 2PDF, 307 Kb, Datei veröffentlicht: Apr 18, 2006
Modellreihe
Serie: TPS54310 (4)
- TPS54310PWP TPS54310PWPG4 TPS54310PWPR TPS54310PWPRG4
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)