Datasheet Texas Instruments SN74LVCHR16245ALR — Datenblatt
Hersteller | Texas Instruments |
Serie | SN74LVCHR16245A |
Artikelnummer | SN74LVCHR16245ALR |
16-Bit-Bus-Transceiver mit 3-Zustands-Ausgängen 48-SSOP -40 bis 85
Datenblätter
SN74LVCHR16245A 16-Bit Bus Transceiver With 3-State Outputs datasheet
PDF, 1.0 Mb, Revision: Q, Datei veröffentlicht: Oct 12, 2014
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 48 | 48 |
Package Type | DL | DL |
Industry STD Term | SSOP | SSOP |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 1000 | 1000 |
Carrier | LARGE T&R | LARGE T&R |
Device Marking | LVCHR162245A | LVCHR16245A |
Width (mm) | 7.49 | 7.49 |
Length (mm) | 15.88 | 15.88 |
Thickness (mm) | 2.59 | 2.59 |
Pitch (mm) | .635 | .635 |
Max Height (mm) | 2.79 | 2.79 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
Bits | 16 |
F @ Nom Voltage(Max) | 100 Mhz |
ICC @ Nom Voltage(Max) | 0.02 mA |
Operating Temperature Range | -40 to 125,-40 to 85 C |
Output Drive (IOL/IOH)(Max) | -12/12 mA |
Package Group | SSOP |
Package Size: mm2:W x L | 48SSOP: 164 mm2: 10.35 x 15.88(SSOP) PKG |
Rating | Catalog |
Schmitt Trigger | No |
Technology Family | LVC |
VCC(Max) | 3.6 V |
VCC(Min) | 1.65 V |
Voltage(Nom) | 1.8,2.5,2.7,3.3 V |
tpd @ Nom Voltage(Max) | 12.5,9.5,5.7,4.8 ns |
Öko-Plan
RoHS | Compliant |
Anwendungshinweise
- Simultaneous-Switching Performance of TI Logic Devices (Rev. B)PDF, 378 Kb, Revision: B, Datei veröffentlicht: Feb 23, 2005
Simultaneous-switching noise can generate and propagate glitches in electronic systems. Therefore, system designers are faced with challenges to minimize simultaneous-switching noise, while increasing switching speed and improving signal quality. This report presents the performance of different TI logic devices under various simultaneous-switching conditions. Factors such as the number of bits sw - Bus-Hold CircuitPDF, 418 Kb, Datei veröffentlicht: Feb 5, 2001
When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of
Modellreihe
Serie: SN74LVCHR16245A (11)
Herstellerklassifikation
- Semiconductors > Logic > Buffer/Driver/Transceiver > Standard Transceiver