Datasheet Texas Instruments REG1118-2.85 — Datenblatt

HerstellerTexas Instruments
SerieREG1118
ArtikelnummerREG1118-2.85
Datasheet Texas Instruments REG1118-2.85

LDO mit einem Ausgang, 800 mA, fest (2,85 V), Stromquelle und Sinkkapazität 4-SOT-223 0 bis 125

Datenblätter

800mA Low Dropout Positive Regulator with Current Source and Sink Capability datasheet
PDF, 274 Kb, Datei veröffentlicht: Sep 27, 2000
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin4
Package TypeDCY
Industry STD TermSOT-223
JEDEC CodeR-PDSO-G
Package QTY80
CarrierTUBE
Device MarkingBB11182
Width (mm)3.5
Length (mm)6.5
Thickness (mm)1.6
Pitch (mm)2.3
Max Height (mm)1.8
Mechanical DataHerunterladen

Parameter

Accuracy3 %
Fixed Output Options2.85 V
Iout(Max)0.8 A
Iq(Typ)3 mA
Operating Temperature Range0 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsFixed Output
Package GroupSOT-223
Package Size: mm2:W x L4SOT-223: 46 mm2: 7 x 6.5(SOT-223) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesN/A
Thermal Resistance ОёJA46 В°C/W
Vdo(Typ)1100 mV
Vin(Max)6 V
Vin(Min)4.75 V
Vout(Max)2.85 V
Vout(Min)2.85 V

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • LDO Noise Demystified (Rev. A)
    PDF, 785 Kb, Revision: A, Datei veröffentlicht: Aug 9, 2017
    Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
  • LDO PSRR Measurement Simplified (Rev. A)
    PDF, 131 Kb, Revision: A, Datei veröffentlicht: Aug 9, 2017
    This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, Datei veröffentlicht: May 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO

Andere Namen:

REG11182.85, REG1118 2.85