Datasheet Texas Instruments LMH6642MFX/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMH6642 |
| Artikelnummer | LMH6642MFX/NOPB |
Low Power, 130 MHz, 75 mA Rail-to-Rail-Ausgangsverstärker 5-SOT-23 -40 bis 85
Datenblätter
LMH664x Low Power, 130 MHz, 75 mA Rail-to-Rail Output Amplifiers datasheet
PDF, 1.8 Mb, Revision: Q, Datei veröffentlicht: Sep 20, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | A64A |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 80 dBc |
| 3rd Harmonic | 65 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 130 MHz |
| CMRR(Min) | 74 dB |
| CMRR(Typ) | 95 dB |
| GBW(Typ) | 130 MHz |
| Input Bias Current(Max) | 2600000 pA |
| Iq per channel(Max) | 5 mA |
| Iq per channel(Typ) | 2.7 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 5 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 115 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 135 V/us |
| Total Supply Voltage(Max) | 12.8 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 17 nV/rtHz |
| Vn at Flatband(Typ) | 17 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730216
Evaluation Board for High-Speed Single Op Amp in the 5- 6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730227
Evaluation Board for High-Speed Single Op Amp in the 8-Pin SOIC Package
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Generation of a VCOM buffer input using PWM signalPDF, 439 Kb, Datei veröffentlicht: Dec 21, 2015
In an LCD the backlight shines through the liquid crystal material and the voltage across the liquid crystal controls how much light shines through it. An active matrix LCD (AMLCD) contains many pixels arranged in a grid pattern. The voltage across each pixel is controlled individually so that high resolution images can be created. One terminal of every pixel is connected to a common plane. The v - AN-1240 Video Transmission Over Twisted Pair Wire (Rev. C)PDF, 102 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
The circuits in Figure 1 and Figure 2 transmit NTSC video signals over twisted pair wire. They weredesigned and tested for transmitting video on inexpensive CAT-3 twisted pair wire. Even when transmittingon 1000 feet of wire, good quality color video was displayed on a monitor with an NTSC input. Both thetransmit and receive circuits use the LMH6643 dual op-amp that has the proper bandwidth - AN-1244 Photo-Diode Current-to-Voltage Converters (Rev. B)PDF, 132 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
Converting the small output current of a photo-diode transducer to a fast responding voltage is oftenchallenging. This application report provides some ways to use high-speed current feedback and voltagefeedback op amps to do the job.
Modellreihe
Serie: LMH6642 (5)
- LMH6642MA/NOPB LMH6642MAX/NOPB LMH6642MF LMH6642MF/NOPB LMH6642MFX/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)