Datasheet Texas Instruments OPA301AIDBVT — Datenblatt

Hersteller	Texas Instruments
Serie	OPA301
Artikelnummer	OPA301AIDBVT

Rauscharmer, schneller 16-Bit-CMOS-Operationsverstärker mit hoher Geschwindigkeit 5-SOT-23 -40 bis 125

Datenblätter

Herunterladen

PDF, 1.2 Mb, Revision: D, Datei veröffentlicht: Jun 13, 2007

Auszug aus dem Dokument

Preise

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Verpackung

Pin	5
Package Type	DBV
Industry STD Term	SOT-23
JEDEC Code	R-PDSO-G
Package QTY	250
Carrier	SMALL T&R
Device Marking	AUP
Width (mm)	1.6
Length (mm)	2.9
Thickness (mm)	1.2
Pitch (mm)	.95
Max Height (mm)	1.45
Mechanical Data	Herunterladen

Parameter

2nd Harmonic	75 dBc
3rd Harmonic	79 dBc
@ MHz	1
Acl, min spec gain	1 V/V
Additional Features	Shutdown
Architecture	CMOS,Voltage FB
BW @ Acl	150 MHz
CMRR(Min)	66 dB
CMRR(Typ)	80 dB
GBW(Typ)	150 MHz
Input Bias Current(Max)	5 pA
Iq per channel(Max)	12 mA
Iq per channel(Typ)	9.5 mA
Number of Channels	1
Offset Drift(Typ)	2.5 uV/C
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	70 mA
Package Group	SOT-23
Package Size: mm2:W x L	5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-Rail	In to V-,Out
Rating	Catalog
Slew Rate(Typ)	80 V/us
Total Supply Voltage(Max)	5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)	2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	3 nV/rtHz
Vn at Flatband(Typ)	3 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	5 mV

Öko-Plan

RoHS

Compliant

Anwendungshinweise

Herunterladen
High-Voltage Signal Conditioning for Low Voltage ADCs
PDF, 135 Kb, Datei veröffentlicht: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented:
Herunterladen
High-Voltage Signal Conditioning for Differential ADCs
PDF, 125 Kb, Datei veröffentlicht: Jun 14, 2004
Analog designers are frequently required to convert high-voltage signals to levels acceptable to low-voltage data converters with differential inputs. This paper describes solutions for this common task using modern amplifiers and typical power supplies. Three examples of conditioning В±10V bipolar signals for low-voltage analog-to-digital converters (ADCs) are shown: a single-supply design,
Herunterladen
Tuning in Amplifiers
PDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
Herunterladen
Single-Supply Operation of Operational Amplifiers
PDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
Herunterladen
Op Amp Performance Analysis
PDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

Modellreihe

Serie: OPA301 (7)

OPA301AID OPA301AIDBVR OPA301AIDBVT OPA301AIDBVTG4 OPA301AIDG4 OPA301AIDR OPA301AIDRG4

Herstellerklassifikation

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)