Datasheet Texas Instruments OPA2830IDGKR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA2830 |
| Artikelnummer | OPA2830IDGKR |
Dualer Breitband-Operationsverstärker mit geringem Stromverbrauch und einfacher Versorgung 8-VSSOP -40 bis 85
Datenblätter
Dual, Low-Power, Single-Supply, Wideband Operational Amplifier datasheet
PDF, 1.1 Mb, Revision: D, Datei veröffentlicht: Aug 28, 2008
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | A59 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 66 dBc |
| 3rd Harmonic | 77 dBc |
| @ MHz | 5 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 290 MHz |
| CMRR(Min) | 76 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 290 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 4.75 mA |
| Iq per channel(Typ) | 4.25 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 27 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 75 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 560 V/us |
| Total Supply Voltage(Max) | 11 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 9.5 nV/rtHz |
| Vn at Flatband(Typ) | 9.2 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7.5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DEM-OPA-MSOP-2A
DEM-OPA-MSOP-2A
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DEM-OPA-SO-2A
DEM-OPA-SO-2A
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA2830 (6)
- OPA2830ID OPA2830IDG4 OPA2830IDGKR OPA2830IDGKT OPA2830IDR OPA2830IDRG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)