Datasheet Texas Instruments OPA358AIDCKTG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA358 |
| Artikelnummer | OPA358AIDCKTG4 |
3V Single Supply 80MHz Hochgeschwindigkeits-Operationsverstärker in SC70 6-SC70 -40 bis 85
Datenblätter
3V Single-Supply 80MHz High-Speed Op Amp in SC70 datasheet
PDF, 844 Kb, Revision: C, Datei veröffentlicht: Feb 3, 2005
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 6 |
| Package Type | DCK |
| Industry STD Term | SOT-SC70 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | AUS |
| Width (mm) | 1.25 |
| Length (mm) | 2 |
| Thickness (mm) | .9 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 75 dBc |
| 3rd Harmonic | 83 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | CMOS,Voltage FB |
| BW @ Acl | 80 MHz |
| CMRR(Min) | 60 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 80 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 7.5 mA |
| Iq per channel(Typ) | 5.2 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 5 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 80 mA |
| Package Group | SC70 |
| Package Size: mm2:W x L | 6SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 55 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 6.5 nV/rtHz |
| Vn at Flatband(Typ) | 6.4 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 6 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA358 (3)
- OPA358AIDCKR OPA358AIDCKT OPA358AIDCKTG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)